Should I replace the water pump at the same time as the timing belt?

If that is the case, then it is advisable to replace the water pump & auxiliary drive belt at the same time as the timing belt while the mechanic has access to all the parts. Once the timing belt is removed, it is only a matter of loosening a few more bolts and screws to change the water pump as well.

How long does it take to change timing belt?

We took a look at some of the components available from Eurocarparts, for the 2015 models shown below, and this is what we found: How long does a timing belt and water pump replacement take? The average time taken for a water pump and timing belt change is between 3 to 6 hours.

What happens if the timing belt fails on a Porsche Cayman?

And if the timing belt fails, whether due to simple age, or the failure of a tension pulley or bearing, the water pump will likely fail along with it. Also, as with the Porsche Cayman’s RMS, the water pump isn’t easy to get at. In fact, ClickMechanic and NAPA explain, you can’t get at the water pump without first exposing the timing belt.

Where is the timing belt located on a car?

True, both are connected to the crankshaft. However, the former is located inside the engine, albeit by the outer wall. The latter is found externally, and drives many of the car’s accessories, like the alternator, power steering pump, and A/C pump. But, as NAPA explains, the timing belt sometimes pulls double-duty.

What happens if you line up your timing belt wrong?

Lining up your timing belt wrong can have disastrous consequences, so get yourself a Fixter specialist on the job and leave nothing to chance. What are the timing belt and water pump replacement costs at a dealership compared to Fixter garages?

How much does it cost to have timing belt replaced at Fixter?

We researched manufacturer pricing for the top 5 UK car models, such as Ford or Vauxhall. As a reminder, Fixter’s timing belt replacement service starts at £299, depending on your car make, model and engine. Rates are based on official car brand websites (and are subject to change), unless otherwise noted.

How to change the head gasket on a MGF?

Please try again later. John Paul at RimmerBros takes us through the process of changing the timing belt and head gasket on an MGF. *EDIT* At 21:45 John Paul states that you tighten to 180 Nm twice. This is corrected to 180 degrees twice, shortly after, but in order to avoid confusion, DO NOT tighten your head bolts to 180Nm.

Why do you need to change your timing belt and water pump?

This might be preceded by a ticking noise coming from the engine bay. In addition, the gasket separating the timing cover and engine block may fail over time, causing oil to leak out. It is technically possible to replace your car’s timing belt and water pump yourself.

Do you replace the water pump at the same time?

Considering that water pumps generally do not cost a lot, it makes sense to do both at the same time. Not replacing the water pump on these vehicles during a timing belt change means if the pump does go at a later point, you will have to pay for the same labour again.

When do I need to replace my water pump?

Your car’s water pump is typically driven by the timing belt and needs to be removed when a new belt is fitted. That’s why water pumps are usually refitted at the same time as timing belts. They’re inexpensive and tricky to access, so it makes sense to replace them together while your car is already in the garage.

When to book A cam belt and Waterpump change?

It has done 22000 miles, how urgently should I book it in for cam belt & waterpump change, immediately or can I wait until later in the year. I have just bought a Vectra from a dealer, the dealer provided it with a third party warranty covering up to £500 parts and labour.

How much does it cost to fix a timing belt?

A typical timing belt will only cost between $25 and $50, but the repair takes at least a few hours. The labor cost to replace a timing belt can range from $200 – $900.

What are symptoms of Bad Water Pump N timing belt?

Top 6 Bad Water Pump Symptoms Leaking of Coolant. When the water pump goes bad, it may leak from the axle sealing or any gasket. Squealing Noise. When the water pump goes bad, it may leak coolant into the bearings of the water pump, which will dry out the bearings of grease and therefore Water Pump’s Axle loose. Overheating Engine. White Smoke From The Radiator.

Should the timing belt be replaced?

If your car has a timing belt, it’s important that you inspect it regularly to ensure that it’s in proper working order. This small part is critical to your engine running properly, and if it breaks the results can be catastrophic. Your timing belt should be replaced every 50,000–70,000 miles, depending on your car’s make and model.

Do timing belts need replacing?

Although timing belts are critical, there’s no need to replace them regularly -unless explicitly recommended in your owner’s manual. Some automakers recommend changing a timing belt between 60,000 and 100,000, others don’t. Many of today’s timing belts can go 100,000 miles or more without needing to be replaced.

How much does it cost to replace a Honda water pump?

Many Honda owners, however, opt to replace the water pump together with the timing belt because if the water pump fails later it will cost the same labor to replace. Plus, a water pump is not a very expensive part ($45-$170).

What’s the timing belt on a 1998 Honda Accord?

Timing belt on 1998 Honda Accord – Maintenance/Repairs – Car Talk Community Hey there…..I was talking to my dad about the timing belt on MR2 and that brought up the issue of the timing belt on his 98 Honda Accord V6. We know that this will fry the engine if it breaks, and our question is how …

How much does it cost to change timing belt?

Had the timing belt/water pump kit installed by the dealer at honda world downey in california, they charged me $843, but they also changed the front brake pads and changed the oil and filter for me. honda of glendale wanted $950 just for the t-belt/water pump kit.

How to change timing belt on Suzuki 1.3?

Part1 of this job – Changing the timing belt, tensioner and water pump on a Suzuki 1.3 engine. This is on a Suzuki Jimny 4×4. But this engine is common on a lot of Suzuki car models. Comment, rate, subscribe. Loading…

What happens if I don’t replace my water pump?

If you don’t replace the water pump…. Not replacing the water pump during a timing belt change means if the pump does go at a later point, you will have to pay for the same labour again. It is likely the water pump will probably have worn after some years of use anyway, and will need replacing sooner than later.

How much to change timing belt?

A typical timing belt will only cost between $25 and $50, but the repair takes at least a few hours. The labor cost to replace a timing belt can range from $200 – $900.

What parts are included in a timing belt kit?

To make things easy, NAPA Auto Parts sells complete water pump and timing belt replacement kit programs for vehicles with timing belt-driven water pumps. The components include the timing belt, water pump, seals and gaskets, pulleys, and tensioners.

Is the water pump connected to the timing chain/belt?

The water pump is attached to an idler sprocket of the left bank of the timing chain. To replace the water pump, both chains need to be removed. This pump has been known to go 200,000 miles or more. If the engine has had timing belt tensioner and guide issues, the sprocket can become worn.

Why does it cost so much to replace timing belt?

The main reason timing belt replacement repairs can cost so much though is that you’re often not just replacing the belt. The timing belt system also consists of a series of tensioner and idler bearings, which help guide and drive the belt. It’s often recommended that these are replaced at the same time as part of routine maintenance.

When to replace idler pulleys, tensioner and water pump?

Generally, the idler pulleys, tensioner and water pump should always be replaced when the timing belt is replaced. In most cases, the timing belt drives the water pump, so it is the right time to replace the water pump. It is also recommended by the manufacturer. WORD TO THE WISE.

Can you do both timing belts at the same time?

The labor cost difference to do both units at the same time is virtually non-existent in most vehicles because, in many cases, you must remove the water pump to get to the timing belt!

How much does it cost to replace timing belt?

A timing belt or water pump often only costs about as much as an hour of labor. Many customers would rather pay a little more now, instead paying for several hours of labor again a few months down the road. Especially considering the hassle of being without a car during another repair.

How much does it cost to replace a timing belt?

The average cost of a water pump and timing belt replacement in the UK is £369. The price can vary, though, with anything from £210 to £620.

Where do you take the timing belt out of a car?

Put the engine in gear (to prevent it spinning when you’re removing the timing belt) and engage the handbrake. The fan belt and power steering belt sit beside the cover which houses the timing belt and water pump, so you’ll need to remove them first.

Changing a timing belt and water pump can take anywhere from 1-3 hours depending on your skill level, so make sure you have the time and space to complete the job. Do the following before you start: Jack up the front of the car so you can access the undercarriage beneath the engine.

How can I tell if my water pump needs to be replaced?

Mechanics can check for coolant flow by comparing the temperature of different parts (hoses) of the cooling system. In some cars, the flow of coolant is visible in the expansion tank. If a water pump is driven by the timing belt, it is often replaced as a precaution during the timing belt replacement.

What happens if a timing belt breaks on a car?

If a belt breaks in a non-interference engine, no damage should be done. But the car will still have to be towed into a shop. When a water pump begins to fail, the engine can overheat. This can cause warped cylinder heads, or a warped engine block. Both are very expensive repairs, especially compared to the cost of a water pump.

How to replace timing belt on 2003 Lexus SC430?

We don’t seem to even have a category in the Lexus “How To” Guides for the “SC” Sports Coupe of the Lexus line. What’s up with that? I could not believe that there isn’t a single video or guide on how to remove the front or rear bumpers on the 430! Sheesh. That was a learning experience… I dont buy new cars. Why?

When do you Know Your timing belt is out?

There are some signs that the timing belt is on its way out. Your engine will misfire, or fail to turn on at all. This might be preceded by a ticking noise coming from the engine bay. In addition, the gasket separating the timing cover and engine block may fail over time, causing oil to leak out.

How much does it cost to replace timing belt on Lexus SC430?

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM. Lexus SC430 Timing Belt Replacement costs $909 on average. What is a timing belt and how does it work? An engine timing belt is a fiber reinforced, toothed drive belt manufactured using durable compounds such as highly saturated nitrile.

What happens if you have a bad timing belt?

If your car or truck is showing signs of a bad timing belt, don’t drive it. Doing so can quickly result in complete engine failure. If the timing belt has already broken, the engine will not start. How often do timing belts need to be replaced?

Where are the teeth on the timing belt?

The teeth on the belt mesh with the crankshaft timing gear and camshaft timing gear. The belt is held tight by a tensioner to ensure the belt doesn’t skip a tooth, or “jump time.” The timing belt may turn an additional gear for the water pump.

When to change the water pump and timing belt?

I the reason most people suggest changing the water pump when replacing the timing belt (myself included) is because while the timing belt is off it only takes a short time to replace the water pump and if it’s an interference engine it’s just extra insurance.

Do you have to pay for timing belt replacement?

Or, in other words, if you get the water pump replaced proactively at the same time as the timing belt, you will pay little labor cost for the water pump’s replacement. If you are planning on keeping this car for more than another year, I would say that this would be economically prudent.

What happens when the belt on a water pump goes bad?

You have an interference motor meaning that a broken belt bends valves and pistons which in effect kills the motor. An old water pump can go bad, start to leak, or even worse the bearing in the pump can give out and lock up the pump and shred the belt. A bad tensioner can come apart and shred the belt.

How do you change the timing belt on a mower?

Turn the camshaft sprockets fully clockwise. Fit the new timing belt, starting at the crankshaft (1) in a clockwise direction, then follow with idler (2), tensioner (3), camshaft sprockets (4), idler (5) and water pump (6). 6. Slacken the tensioner retaining nut and remove the locking pin.

Why do you need a timing belt kit?

Timing/distribution systems on today’s engines require the use of special service tools so that, after repair, the engine’s power, fuel economy and longevity are all assured. The correct and complete kit for the engine being serviced is needed, including the water pump, if driven off the timing system.

Is the timing belt connected to the water pump?

The timing belt may also drive the water pump . More than half of all engines that have timing belts (some use timing chains, which are not the same) also use the belt to drive the water pump. This is mostly due to the location of the belt to the pump. Because of this, anytime you replace one, you should replace the other.

When should the timing belt/water pump be replaced?

Rough engine noise when idling
Heavy vibration when idling
Misfiring of the engine
Excess smoke from the exhaust
visible by an engine warning light or increase in temperature

What is the normal life of a timing belt?

The expected lifespan of your timing belt is specific to your car and engine configuration, usually between 60,000 and 100,000 miles. (You can check your owner’s manual or look online for your car’s service schedule.)

When to replace timing belt?

Every car manufacturer recommends replacing the timing belt after a given time, and it is imperative to take this advice. The time or distance between timing belt replacement depends on the specific make and model of the vehicle, but on average it should be changed every 100,000 miles.

Can a malfunctioning belt cause a water pump to break?

A malfunctioning water pump can cause the belt to break, which can cause the piston to strike and damage the valve, which results in major engine repair and major dollar signs. So, in a nutshell, the answer to the water pump question is “consult your friendly neighborhood auto repair shop.” That would be us.

What kind of car has a broken timing belt?

A lot of smaller cars like the Honda Civic, Volkswagen Jetta, or Acura TSX utilize a high-compression small engine in order to get a little more performance for their size. With an interface engine, the valve opens further into the combustion chamber, so a broken timing belt can cause big problems.

When to replace timing belt and water pump?

In most cases, the timing belt drives the water pump, so it is the right time to replace the water pump. It is also recommended by the manufacturer. WORD TO THE WISE. Be careful when you call for an “over-the-phone” estimate for replacing a timing belt and/or water pump.

Generally, the idler pulleys, tensioner and water pump should always be replaced when the timing belt is replaced. In most cases, the timing belt drives the water pump, so it is the right time to replace the water pump. It is also recommended by the manufacturer. WORD TO THE WISE.

What happens when your timing belt comes off?

When a timing belt breaks, the engine stops…meaning it is not going to get you where you’re headed. So proactively check out your ‘serp belts’ or have a trusted technican (hint like at Pride Auto Care ) and replace the belt (s) before they break or get loose and come off.

Which is better timing chain or timing belt?

Timing belts have replaced timing chains and are on many of today’s engines. Both belts and chains ensure that crankshaft, pistons and valves operate together in proper sequence. Belts are lighter, quieter and more efficient than chains.

How do you remove a water pump from a car?

Use a ratchet or wrench to remove the water pump mounting bolts. Remove the water pump from the vehicle. If the water pump doesn’t come off easily, give it a couple of taps with a dead blow hammer to break it free. Some water pumps are driven off the engine’s drive belt, while others are driven off the timing belt or timing chain.

Mechanics can check for coolant flow by comparing the temperature of different parts (hoses) of the cooling system. In some cars, the flow of coolant is visible in the expansion tank. If a water pump is driven by the timing belt, it is often replaced as a precaution during the timing belt replacement.

Many Honda owners, however, opt to replace the water pump together with the timing belt because if the water pump fails later it will cost the same labor to replace. Plus, a water pump is not a very expensive part ($45-$170).

Changing a timing belt and water pump can take anywhere from 1-3 hours depending on your skill level, so make sure you have the time and space to complete the job. Do the following before you start: Jack up the front of the car so you can access the undercarriage beneath the engine.

If you don’t replace the water pump…. Not replacing the water pump during a timing belt change means if the pump does go at a later point, you will have to pay for the same labour again. It is likely the water pump will probably have worn after some years of use anyway, and will need replacing sooner than later.

A malfunctioning water pump can cause the belt to break, which can cause the piston to strike and damage the valve, which results in major engine repair and major dollar signs. So, in a nutshell, the answer to the water pump question is “consult your friendly neighborhood auto repair shop.” That would be us.

Where do I go to replace my water pump belt?

If you notice this warning sign, contact a local ASE certified mechanic to replace your water pump belt. This process requires specialized tools and experience in replacing the belt, as it needs to be looped through multiple components to work correctly.

How does a water pump work in a car?

In the majority of today’s cars, a water pump is a mechanical device rotated by a drive belt. The drive belt itself is driven by the crankshaft pulley of the engine. In some cars, a water pump is driven by a timing belt or timing chain.

How to change the timing belt on a Toyota Landcruiser?

How to: Change timing belt and water pump on Toyota Landcruiser 1HZ/1HD/1HDFT/1HDFTE Part 1 – YouTube Today we change the timing belt, water pump, thermostat and coolant on Dan’s HDJ79 series Toyota landcruiser. Today we change the timing belt, water pump, thermostat and coolant on Dan’s HDJ79 series Toyota landcruiser.

Which is the best timing belt replacement tutorial?

Toyota Waterpump and Timing belt replacement Tutorial, HZJ, 1HDT 1PZ etc, PowerModz.com! – YouTube Toyota Waterpump and Timing belt replacement Tutorial, HZJ, 1HDT 1PZ etc, PowerModz.com!

Navigation