Is the third brake light an MOT failure?
If your car has a centrally mounted third brake light (which it doesn’t legally need), it has to work. The basic rule is: if it’s there, it needs to function. Check the sidewalls for bulges and cracks, as these are not only MOT failures, but highly dangerous at any speed.
Will my car fail MoT with brake light out?
If more than half of your brake lights aren’t working you’d receive a Major, meaning the vehicle would fail the MOT. In that case, you won’t be allowed to drive the vehicle until it’s repaired.
Can a third brake light be repaired on a Mercedes?
The leds normally work partially , once repaired the 3rd brake light is restored to n… The third 3rd brake light on the Mercedes E Class W211 can be repaired. The leds normally work partially , once repaired the 3rd brake light is restored to n… Skip navigation Sign in Search Loading… We’ll stop supporting this browser soon.
How to install brake light switch on Mercedes Benz E-class?
Plug the wires in the new switch and install the new switch by twisting it counter-clockwise. Watch the following video on how to install brake stop light switch on an Mercedes-Benz E-Class . I replaced the brake light switch but the lights are still on.
Where is the brake light switch on a Mercedes W210?
In the older W210 E-Class, it is located in the back on the back of the pedal. You may need to lay on your back to access the switch. To remove the switch, press on the locking tab and then rotate it clockwise. Step 4. Install new switch Once you remove the old brake light switch, unplug the electrical wires from it.
Why are the rear brake lights not working?
Hi, I just failed the annual roadworthiness test because the rear lights don’t work. The bulbs are okay and the high mounted central light is working fine. What can cause that? Thanks in advance for any help you can give. 2005 A150. 100,000 kms on the clock. Brake pedal switch? Brake pedal switch? Click to expand…
Plug the wires in the new switch and install the new switch by twisting it counter-clockwise. Watch the following video on how to install brake stop light switch on an Mercedes-Benz E-Class . I replaced the brake light switch but the lights are still on.
Can a third brake light be replaced on a Mercedes Benz?
Look closer, and this article will show you how to replace the third brake light in your Mercedes-Benz E-Class w211. This article applies to the Mercedes-Benz E-Class w211 (2002-2009). Manufacturers build vehicles with safety in mind. Mercedes-Benz’s E-Class is no exception.
In the older W210 E-Class, it is located in the back on the back of the pedal. You may need to lay on your back to access the switch. To remove the switch, press on the locking tab and then rotate it clockwise. Step 4. Install new switch Once you remove the old brake light switch, unplug the electrical wires from it.
What to do if your brake light switch is not working?
Try turning off the engine and remove the key, wait a few seconds and restart the car. That may solve the problem temporarily. Even though the problem could be multiple things, the brake stop light switch is the first thing you should inspect. Which Mercedes-Benz models are impacted by the defective brake light switch?