Is the speedometer not working and ABS and brake light stay?

Re: Speedometer not working and abs and brake light stay… You can’t post conmments that contain an email address. An expert who has achieved level 1. An expert whose answer got voted for 2 times. Re: Speedometer not working and abs and brake light stay…

Why is my odometer and speedometer not working?

Odometer & speedometer not working ABS & Brake warning lights lit. I have the same problem! what number fuse is it? and where is it located ? 756 people found this helpful.

Where is the speedometer sensor on a car?

The speedometer sensor is located inside the transmission and attached to a driveshaft, which impacts multiple functions of the car. Due to this fact, it’s possible that the Check Engine Light will light up on the dashboard if a sensor problem is discovered by the vehicle’s CPU.

When to see a mechanic about your speedometer?

If you feel you are driving faster or slower than what the speedometer reads, it is a good idea to have your vehicle inspected by Your Mechanic, as this might be a problem with the sensor that can be repaired or an indication that the speedometer sensor needs replacement.

Why is the ABS light not working on my Bronco?

I have a 1995 Bronco that I just bought and the speedometer doesnt work, the abs light is on, the overdrive light flashes and as a result the transmission is shifting very hard and basically when ever it wants to. Ive read that the VSS in the rear diff sometimes goes out so I replaced that and nothing (its the same).

What to do if your Speedo is not working?

Run it around to heat the engine up and shift thru all gears incl Reverse. Then turn off all accessories/lights, etc. Make sure A/C is off and transmission is in Park (automatic) or in Neutral for a Manual & release clutch. Do Key On Engine Off (KOEO) portion first.

Why is my abs and brake light not working?

If you purchase one from a junk yard or used parts dealer, your mileage will not be correct and some of your options will not work. You can’t post conmments that contain an email address. An expert who has achieved level 1. An expert that has 1 follower. Re: Speedometer not working and abs and brake light stay…

What does it mean when your abs light comes on?

This would certainly cause the ABS light to come on, which means you’d need to replace the pump right away. When the ABS light activates on your car’s dashboard, it signals that something is wrong with the anti-lock braking system.

Why is my speedometer not working on my Dodge?

My company used to repair body computers (BCM) for Chrysler/Dodge vehicles which contol the warnings you are getting. The car wash could be a major clue. We have seen numerous false intermittent warnings created due to fluid intrusion, such as water, into the BCM assembly.

How can I tell if my speedometer sensor is bad?

On most cars sold today, this will be indicated by the cruise control light being illuminated on the dashboard – even if it’s not engaged. If you experience this problem, it’s possible that the speedometer sensor needs to be replaced. 3. Check Engine Light comes on

Why does my odometer go out on my Harley Davidson?

The problem randomly while riding the 6th gear indicator will go out, the speedometer drops to “0”, odometer stays on but stops recording mileage, no codes are displayed. Not aware of lights on or off haven’t rode at night when it happens.

How to fix a speedometer on a Harley Davidson?

FMH Reply: Michael, check out your ECM plug. Disconnect it from the ECM and blow it out with compressed air. Reassemble with electric grease. You should also do the same with your TSSM (turn signal security module) and its plug. You did not mention any modifications to this m/c. That info is usually helpful. Reply: Thanks you.

Why does the instrument cluster shut off intermittently while driving?

The batt light goes on and the entire instrument cluster (spedo fuel turbo temp etc ) shuts off .. when it’s off the climate control won’t work and the sun roof won’t work . Sometimes the abs light comes on before it shuts off. Turns on and off intermittently. I’ve checked fuses and cleaned battery connections and ground connections .. please help

What would cause the odometer light to go out?

It sounds like the instrument cluster i.e the odometer display may be wearing out. If you are only talking about the illumination for the odometer at night, then that may just be bulb that is getting old. Thanks for taking the time to respond.

How does the speedometer work in a car?

Today’s cars and trucks have electronic fuel injection, which is controlled by the onboard computer. The EFI supplies fuel to the engine based on input from multiple sensors; one of which is the speedometer sensor.

Why does the speedometer needle bounce when stopped?

Sometimes the speedometer needle will “bounce” when the vehicle is stopped, indicating an issue with the ABS system rather than the speedometer itself. Your ABS controller or module may be the culprit. The controller is the easiest to test first. Sometimes water or condensation gets inside the controller and stops it from working.

When does the anti lock brake warning light come on?

There are times when the anti-lock brake warning light may come on on your car’s dashboard when the brakes are in good condition. It may even happen after you have recently had the brakes serviced. If you know your car’s anti-lock brake system is in good condition and the light is still on, there are some steps you can take to reset the light.

How to diagnose why Ram 1500 speedometer is not working?

Blog – Ram 1500 Speedometer Not Working – Diagnosis and Repair 1 Check the fuse to the speedometer 2 Replace it with another 15amp fuse 3 Make sure that you fill the spare 15amp fuse slot or the problem will not go away, and the missing fuse may cause other malfunctions to occur

What to do when your brake light stops working?

My cruise also stopped working, and I noticed my brake lights would stay lit anywhere from 2 to 10 seconds after lifting my foot off the brakes. I simply replaced the brake pedal switch located just above the brake pedal. ($10) Took about 2 minutes if that. Please rate and respond to both of my posts if this helps anyone else.

What causes the speedometer to go to zero?

When water comes in contact with certain connections in a car, it can cause blown fuses, each of which controls something different. If the fuse that controls your speedo is blown, it probably won’t work. In this case, replace the fuse and have your wiring looked at by a professional. A faulty speed sensor.

What to do if your speedometer is on the Fritz?

If this fails, or you can’t identify the cause of your malfunctioning speedometer, you should consult with a professional mechanic in your area that will be able to give your car a good check over and find out exactly what’s causing your speedo to be on the fritz.

When did the Speedo stop working on my Dodge Ram?

53 people found this helpful. I have a 2001 Dodge Ram 3500 Van and about 9 months ago the speedo stopped working, the AC stopped working (blowing cold and vent blowing on HIGH), the ABS and Brake light came on steady and the check engine light came on. It also pulsed or surged at times when driving.

Are there any common problems with Mercedes SLK?

i think its more related to the “type ” of slk he is looking at. for instance some common issues for slk may be. top issues ie: hydraulic cylinders leaking seals cracking hinges stiff. brakes and services performed. slk32 issues are intercooler pump, lower a arm bushings.

What does it mean when your speedometer stops working?

The temperature seems to be the key wether it works or not. When the speedometer stops working, many warning lights come on. The are the parking brake light, brake wear light, bas/esp, abs, and maybe one more i am fogetting.

How to change the fluid in a SLK?

Look in the w210 forum for 722.6 sticky, how to change the fluid – look at post by Yumling for optimal fluid change, quantity and type of fluid, etc. Type of fluid especially important! You also have to buy or make a dipstick. It does not stay in place, but is only used to measure the level.

What to do if your SLK has a broken tab?

You have to open the leather cover to see the broken tab. Search under his name These are the rubber blocks – you can slide them along to get optimum position. looked up the manual 3511, it is the not for R170 in the sense that the engine is different. The title states NOT FOR KOMPREESOR! Click to expand…

How to find out if your ABS sensor is working?

Click to expand… 1. Go to the first thread in the E39 forums ( the VERY best of E39 Links) 2. Search for ABS (you’ll find this post) 3. Click on this canonical summary in that post (in addition, see Bill’s ‘logic’ of testing ABS sensors ).

Can a faulty ABS sensor cause the ESP system to be disabled?

Because the ESP system depends on the ABS system to function properly, the ESP system will also get disabled. A faulty ABS sensor could cause other issues as well such as Check Engine Light, car not moving when in Drive, speedometer not working.

What’s the difference between ESP, ETS, and ABS?

ESP stands for Electronic Stability Program. It helps as you drive by braking individual wheels or reduce engine torque output. ETS stands for Electronic Traction Support. It stops the wheels spinning under hard accelerating conditions or on low traction surfaces. ABS stands for Anti-Lock Braking System.

Can a failed ABS sensor trigger the Bas light?

If you have an ABS sensor that has failed, it will also trigger the ABS, ESP, BAS light. Because the ESP system depends on the ABS system to function properly, the ESP system will also get disabled.

What do the lights on the Mercedes dashboard mean?

Modern Mercedes-Benz cars are filled with lots of sensors that monitor how each system in the car is behaving. The lights on the dashboard display what systems are in use and they also highlight when one of those systems is not working as it should. But what do all those different symbols mean?

What does the ABS warning light on a Mercedes mean?

If the ABS warning light is also illuminated this signals that the braking system has malfunctioned and your brakes may not work properly. In this case the Electronic Brake Force Distribution (EBD) warning light may also be illuminated. Can I still drive with my parking brake and brake fluid light on?

What are the symptoms of a bad ABS control module?

Common Bad ABS Control Module Symptoms. 1 1) Brakes Locking. The whole purpose of an ABS control module is to prevent locking of the wheels. If you notice that your wheels are locking up while 2 2) ABS Light On. 3 3) Brake Pedal is Unresponsive. 4 4) Increased Brake Pedal Effort. 5 5) Speedometer Fails.

How does the ABS system work on a car?

The ABS system works to limit tire slip by using wheel speed sensors to detect the speed of each tire. If one tire is spinning substantially slower than the others while you’re braking the vehicle, the brake caliper on that particular wheel will be released very briefly so that tire can regain grip.

Why is my speedometer not working on my Aveo?

The causes of a bad speedometer will typically be found in these four things: VSS – A faulty speed sensor will often be accompanied by the P0500 (VSS circuit malfunction) trouble code. The speed sensor does more than just control the speedometer, it also helps to control the cruise control system and may even affect the way that the engine runs.

What happens when your Abs doesn’t work?

In rare cases where your ABS control module doesn’t work, the speedometer on the dashboard will stop working. Either it will show you an incorrect speed or the needle will just rest at 0 mph. This will usually be followed by the ABS or check engine light coming on.

Is it bad to brake and steer with ABS?

Note: it is generally a very bad idea to brake and steer at the same time even if you have ABS equipped. While you’re braking, the weight of the vehicle pitches forward, leaving the rear end of the car very light. If you attempt to steer with a light rear end, the car could easily spin.

How do I change the red light on my speedometer?

I had turned off my bike with the switch in high beam position, when turning on the ignition, after the initial “all lights on” on the speedometer goes out, the red light is not coming back on, switch the light switch to low beam, and the light comes on! Replaced the light and no more red light!

How much does it cost to replace a stealer speedometer?

The stealer will charge you $100 to plug in their diagnostic computer for the same information. Parts and labor to replace the light is extra.. I was on a group ride today. I have a 2012 Dyna Wide Glide. 40 miles into my ride the red indicator light on the speedometer turns on.

Odometer & speedometer not working ABS & Brake warning lights lit. I have the same problem! what number fuse is it? and where is it located ? 756 people found this helpful.

Why is the ABS light and brake light not working?

I have a 1998 Dodge Ram 1500 Both the ABS light and the brake light are on. Changed the Speed sensor on the differential it didn’t help. I did replace the RWAL/ABS fuse and now the speedo works. Next I’m checking the front wheel sensors after that idk what to try. Any advise would be helpful. I have a 99′ Dodge RAM 2500.

How to get and erase ABS trouble codes?

Our mission is to provide you with information that can help you solve your car problem quickly. How to Get and Erase ABS Trouble Codes! An error occurred while retrieving sharing information. Please try again later.

How to fix ABS and brake light on Dodge Ram?

Dodge Ram abs, airbag, brake light, speedometer fix! – YouTube Dodge Ram abs, airbag, brake light, speedometer fix! If playback doesn’t begin shortly, try restarting your device.

What happens when the remote starter does not work?

If they no longer flash when you ask your vehicle to lock or unlock using the remote starter controller, you may be in valet mode. If you can lock and unlock your doors just fine but ONLY the remote start does not work, you may be in valet mode.

Why does my horn blow when I lock my door with the remote?

Since the receiver is working (the door is locking), and the horn is working (you can blow it with the horn button), the relay or the wiring from the remote receiver to the horn relay is shorted out or not operating correctly. Originally Answered: Why doesn’t my horn blow went I lock my door with the remote?

How can I unlock my car with the horn on?

Try pressing both lock and unlock at the same time. Some vehicles have a function to toggle the horn when the vehicle recieves the lock signal depending on the users preference. Have you been hacked? 80% of emails online have been exposed in data leaks.

What does the fob remote on a Mercedes Benz do?

The newer keys have a transponder integrated in them. The key fob remote serves two purposes. First it disables the anti-theft system when you unlock the car. Second, Drive Authorization System verifies the key to make sure it is the right key to start the car.

Why is my anti lock brake light on?

The anti-lock brake system is a complex configuration of computers and sensors. When all of the components are working in perfect harmony, it ensures a quick, reactive system that can improve braking control under all surface conditions. Faults in this system are often first indicated by illuminated lights in the gauge cluster.

Dodge Ram abs, airbag, brake light, speedometer fix! – YouTube Dodge Ram abs, airbag, brake light, speedometer fix! If playback doesn’t begin shortly, try restarting your device.

What causes the ABS light to come on?

5 Common Reasons the ABS Light Comes On 1 Low Brake Fluid. 2 Faulty Speed Sensor. 3 Bad ABS Module. 4 Bulb Check. 5 Worn Hydraulic Pump.

What does it mean when your brake system light is on?

The brake system light indicates a much bigger issue with your braking system — a problem which may limit your ability to brake the vehicle at all. Therefore, you would need your vehicle towed to the mechanic if you notice both lights on.

Why is my anti lock braking not working?

The module of the anti-lock braking system can form corrosion after a while. This is actually one of the most common reasons for why there ends up being a problem with the anti-lock braking system. If the module is corroded, then it can’t obtain information from the wheel speed sensor.

Most commonly, this light is triggered by low brake fluid or an engaged parking brake. However on some vehicles, it can simply indicate a problem elsewhere in the system and can be illuminated immediately if there is an ABS fault.

Can a parking brake light be activated by ABS?

Usually, the brake fluid level sensor and the parking brake are the only two items that can activate the BRAKE light. But, not all vehicles are the same, and some of the earliest ABS systems would trigger both lights simultaneously for any ABS fault.

What should I do if my ABS sensor is not working?

Debugging is best done with a DMM; an OBDII scanner can ONLY find “communication errors”, i.e., it cannot tell a bad speed or pressure sensor from a bad ABS control module and will often report the wrong problem because it isn’t inserted BETWEEN the ABS control module and the various sensors (see extensive reports by 540iman on this ).

When does the ABS brake light come on?

If any of the teeth are damaged or missing, the ABS brake light will come on, warning the driver of a problem. The new style ABS systems use a magnetic encoder built into the wheel bearing, and if the wheel bearing is installed backward with the encoder facing out, it won’t take long before your ABS light is on and your stress level goes up.

What should you do if your abs light is on?

Just because your ABS light is on, that doesn’t mean you can’t drive your vehicle. In fact, you will still be able to step on the brake pedal and slow the vehicle down. However, you cannot perform any kind of emergency stop by slamming the brake pedal quickly.

What to do if your abs is not working?

Open the hood, disconnect the ABS control module harness & check the four wheel speed sensors with a DMM; b. If any wheel speed sensor tests bad, doublecheck at the appropriate wheel; replace the bad one with an OE sensor (<$100, rarely more than one!); c.

Why is my left rear Speedo not working?

GO FLYERS!!! Most common cause of these symptoms is a bad wheel speed sensor and I believe a dead speedo usually points to the left rear wheel’s sensor. There is no relation to having just changed the fuel pump……simply a coincidence.

Why is the ABS light on and the Speedo not working?

After a recent jump start my daughter’s 1993 C180 developed 2 problems. The ABS light stayed on and the speedo didn’t work. A search of the forums suggested resetting the car by disconnecting the battery but that didn’t work.

Why are my instrument gauges not working on my truck?

It was the computer harness on mine. The one that says dash harness coming out of the computer because there’s 2 come out from the computer. Had the exact same problem, my mph gauge would say no data and 5 gauges were not working, the needles on 5 gauges would swipe like whipers and there were red lights staying on.

What to do if your abs light is not working?

2004 Lexus LS 430 Modern Luxury. 2012 Acura TSX (fun fun) Maybe MB again one day… The needles stick on this car. You can pull the cluster out and clean the needles with alcohol and q tip and they will be fine. They also sell sleeves for the needles too. The paint they used on them becomes tacky causing them to stick to the peg they rest on.

Why is my speedometer not working on my truck?

So after dropping my 13 speed Eaton And got it rebuilt after butting the transmission back and test drove the truck I found out that My speedometer doesn’t work because I think that the speed sensor wires got missed up some how after mounting the trans up , any idea how to rewire the speedo sensor with new wires . Your response is appreciated .

What does it mean when a light flickers?

“A flicker refers to the specific situation where lights are brightening and dimming rapidly—more than once per second,” says John A. Orr, professor emeritus of electrical and computer engineering at Worcester Polytechnic Institute in Massachusetts.

What are the symptoms of a bad speedometer sensor?

Symptoms of a Bad or Failing Speedometer Sensor. Cost of Replacing a Bad or Failing Speedometer Sensor. Common signs include the speedometer not working, cruise control not engaging, Check Engine Light coming on, and loss of power.

What do you need to know about brake light problems?

Brake light problems don’t have to be head-scratchers. There are certain issues that crop up over and over again when diagnosing brake light issues, which makes it that much easier to figure out what’s wrong with your brakes when you tap the pedal. Check out these four common brake light conundrums and how you can solve them.

Why does the ABS light still come on on my 1998 Dodge truck?

On my 1998 Dodge there is no ”Not Ready light”,thanks.. I have a 1998 Dodge Truck 1500 ..ABS light still comes on after replacing both front and rear ABS sensors and the Kelsey-Hayes ABS module ,what else could be causing the ABS light to still come on? Possible Loose wheel bearings I’ve been told ?

Are there different types of Volvo ABS modules?

There are only two kinds of ’96 and on Volvo ABS modules, those that have failed and those that are going to fail. It is curious that yours has progressed so far so quickly. The normal sequence of events is for the ABS and Tracks lights to start to flicker . After a few weeks they ABS and Tracs lights come on steady.

When do the ABS and TRACS lights go off?

The normal sequence of events is for the ABS and Tracks lights to start to flicker . After a few weeks they ABS and Tracs lights come on steady. After many more weeks the speedometer and odometer begins to quit.

Navigation