Is the Odyssey stm32mp157c a carrier board?
The ODYSSEY – STM32MP157C is created in a form of SoM (system on module) plus a Carrier board. The SoM has consisted of the MPU, PMIC, RAM and the carrier board is in Raspberry Pi form factor.
What are the power input ports on an odyssey?
1.Carrier board : Install the Seeed SoM-STM32MP157C area, if the user wants to remove the core board, slowly tilt the core board up and then remove, never remove by hand. 2.DC Power Input Port : 12V~24V/2A (12V/2A power input is recommended) (5.5×2.1mm center-positive barrel).
What are the parts of the Odyssey carrier board?
ODYSSEY – STM32MP157C consists of two parts: Carrier board and Seeed SoM – STM32MP157C. Carrier board hardware details follow: 1.Carrier board : Install the Seeed SoM-STM32MP157C area, if the user wants to remove the core board, slowly tilt the core board up and then remove, never remove by hand.
What should the baud rate be on an odyssey?
Windows : Use PUTTY, select Serial protocol, fill in the COM port corresponding to ODYSSEY -STM32MP157C, 115200 baud rate, 8 bit, no parity bits, a stop bit 1, no flow control. Linux : Depending on the USB To TTL Adapter, should be screen /dev/ttyACM0 (,1, and so on) 115200 or screen /dev/ttyUSB0 (,1]
Where do I find the DTCs on my Honda Odyssey?
Honda techs use their fancy HDS (Honda Diagnostic System) to retrieve the DTCs, but the service manual also shows an alternative method. This method requires a 2-pin service connector (Honda part # 07PAZ-001010A) to be plugged into a service socket in the driver’s under-dash fuse box. Any B-CAN DTCs will then be displayed in the odometer display.
What is the part number for Honda Odyssey?
I made a mistake with the service connector part number…the 05/06 Odyssey requires 07 W AZ-001010A, not 07 P AZ-001010A.
What does B can stand for in Honda Odyssey?
The correct way to troubleshoot my door lock/wiper problem is to retrieve any B-CAN DTCs (Diagnostic Trouble Codes) that may have set (B-CAN = Body Controller Area Network). Honda techs use their fancy HDS (Honda Diagnostic System) to retrieve the DTCs, but the service manual also shows an alternative method.
How big is the fuse box on a Honda Odyssey?
These scans are from page 22-128 of the 2005-2006 Odyssey service manual. 2007 is probably the same, but no guarantees. The service connector in the fuse box has two flat pin terminals. The pins accept 1/8″ female push-on terminals.