Is the cylinder head on a Jeep Cherokee working?

In order to ensure the smoothest ride possible, make sure your Jeep Cherokee cylinder head is working as it should so that the combustion chamber is properly formed. Numerous problems become apparent when your engine cylinder head for Jeep Cherokee stops functioning.

Which is 4.0L Jeep motor will fit your Jeep?

91-01 XJ, 93-98 ZJ, 91-95 YJ, 97-99 TJ You will need to relocate temp sender to thermostat housing from HO motor. Also need to use all your Renix accessories, distributor, flywheel/flexplate, etc. 00-01 is not recommended due to crappy head. Some people say the 0331 isn’t as bad as people say.

Is the 0331 head of a jeep bad?

Some people say the 0331 isn’t as bad as people say. We scrap Jeeps, more than likely if we get a 0331 head Jeep in the head is cracked, well over half the high mileage 00-01 ones we get in have this problem.

Which is better 99-04 WJ or 00-06 tj-2002?

99-04 WJ, 00-06 TJ – 2002 and up were TUPY heads and did not have the cracking problems that earlier 0331 heads had. 02+ are recommended. 99-04 WJ, 00-06 TJ – 2002 and up were TUPY heads and did not have the cracking problems that earlier 0331 heads had. 02+ are recommended.

Do you need a 4.0 cylinder head for a jeep?

Make sure that your Jeep’s engine has everything it needs for efficient operation with the right Jeep 4.0 performance cylinder head. It is easy to find a Jeep 4.0-cylinder head replacement so you do not have to be without your rig. 4WD.com ensures that you can quickly locate the Jeep cylinder head needed for a smooth-running engine.

Is the Jeep Cherokee 4.0 block the same as the YJ / TJ?

There may have been differences in the mount pads between the YJ/TJ and the XJ/MJ/ZJ/WJ, I’ve not yet confirmed this. The 1999/2000 split (distributor ignition to COP/DIS) was a change in the cylinder head and had nothing to do with the block.

What is the casting number on a jeep 4.0L?

This issue we are going to take a look at the cylinder heads for the 4.0L Jeep. There are four of them and you really cannot swap them around, so you had better know what you have and what fits where. All years of 4.0L production used cast iron cylinder heads. In 1987-1990 the cylinder head casting number is 2686.

What are the symptoms of a Jeep Cherokee overheating?

If your Cherokee is run for too long of a period while overheating, the head gasket may blow. Bad head gasket symptoms include white smoke coming from the tail pipe, rough idle, and oil in the coolant. Shutting down before it overheats, or as soon as you see that it is overheating will usually prevent this from happening.

Is there a vacuum leak in the Jeep Cherokee 4.0?

A common problem in the 4.0 jeep engines is vacuum leaks around the throttle body. Here’s the solution I found for the HUGE vacuum leak in my 2000 Cherokee. Category Autos & Vehicles Show moreShow less Loading… AutoplayWhen autoplay is enabled, a suggested video will automatically play next. Up next

What are the symptoms of a bad head gasket?

Bad head gasket symptoms include white smoke coming from the tail pipe, rough idle, and oil in the coolant. Shutting down before it overheats, or as soon as you see that it is overheating will usually prevent this from happening. The first thing that you need to do is check your Cherokee’s overflow container.

When did the Grand Cherokee 0331 cylinder head come out?

All 00-01 XJs have the 0331. It was sometime late in 02 for the Grand Cherokee before they switched to the new casting from TUPY (Brazilian foundry). Re: 0331 – cylinder head – what years?

When did the Jeep Grand Cherokee get a makeover?

In 1999, the Jeep Grand Cherokee underwent a complete makeover. And when we say complete, we mean it. The new and improved Grand Cherokee only used 127 parts from the previous design. The new vehicle was slightly larger overall and had a new interior layout, but it retained that classic Cherokee look and style.

What kind of stereo system does a Jeep Grand Cherokee have?

The Grand Cherokee was available with two different stereo packages. The base system was an AM/FM/cassette player and six speakers (front and rear doors, and dash tweeters).

What kind of gear does a Jeep XJ have?

Yukon Gear & Install Kit package for Jeep XJ with Dana 30 front and Chrysler 8.25” rear, 4.56 ratio. *Fits Jeep XJ and YJ with reverse rotation Dana Spicer 30 front and Chrysler 8.25″ rear *4.56 ratio *Includes front and rear ring & pinion sets and master overhaul kits Yukon gear packages…

What’s the gear ratio for a Jeep Cherokee?

If your Jeep is just a stock 4.0-liter you’ll want anything from a 5.29:1 to 6.17:1 gear ratio for the AW4 automatic. If your Jeep has an AX-15 you’ll probably want 4.88:1 or 5.13:1 gears to make crawling as easy as possible.

What is the Yukon gear package for Jeep XJ?

Yukon Gear & Install Kit package for Jeep XJ with Dana 30 front and Chrysler 8.25” rear, 4.88 ratio. Description: *Fits Jeep XJ and YJ with reverse rotation Dana Spicer 30 front and Chrysler 8.25″ rear *4.88 ratio *Includes front and rear ring & pinion sets and master overhaul kits Yukon gear packages…

How to replace ignition distributor in Jeep Grand Cherokee?

9. Rotor, cap, connections Now install the rotor, then the cap and distributor connector. Then using previously made notes correctly connect all ignition cables. 10. Fan Reinstall the auxiliary fan and connect negative battery cable. Start engine. Take a beer. Technorati Tags: Jeep, Cherokee, XJ, Grand Cherokee, ZJ, distributor, rotor, cap

Do you need to turn crankshaft vibration damper on Jeep Grand Cherokee?

This step is only necessary when procedure is done on the Cherokee (XJ) model – this is the only way to turn the crankshaft vibration damper. In Grand Cherokee (ZJ) you have access to this bolt from underneath.

How to change oil pump on Jeep 4.0L?

First, using flat screwdriver, set the oil pump shaft around 11 o’clock position: 7. New distributor preparation Then take the new distributor, put the old cap on it and mark the distributor next to the number one cylinder terminal as you did with the old one. Then set distributor’s shaft in a way that rotor’s line should point on 4 o’clock. 8.

What kind of engine does a Jeep Cherokee have?

Jeep offered a version of the Cherokee from 1984 until 2001. In 2001, this midsize sports utility vehicle was available in numerous trim options, including the Classic and the Sport. Both the 2001 Classic and Sport have a 4.0-liter, inline six-cylinder engine. It has a bore of 3.87 inches, a stroke of 3.41 inches and a compression ratio of 8.8:1.

What’s the difference between a Jeep Cherokee and a jeep classic?

The Difference Between Jeep Cherokee Sport and Classic by Anne Davis Jeep offered a version of the Cherokee from 1984 until 2001. In 2001, this midsize sports utility vehicle was available in numerous trim options, including the Classic and the Sport.

What kind of steering does a Jeep Grand Cherokee have?

I own a 2001 Jeep Cherokee sport 2 wheel drive. I bought it used in 2002 with 30,000 miles on it. It seemed in perfect condition. The day i test drove it I noticed a slight shimmy on the steering wheel at around 50-55 mph. It drives smoothly at lower speeds and also gets smooth once you pass 55 mph.

Why is my Jeep Grand Cherokee steering unstable?

If the tire seems to move rather freely for just a little without the other tire or steering wheel moving with it, then you’ve got a bad tie-rod end/ends or drag link joint. You can grab the tie-rod itself and try to rotate it.

What’s the caster on a Jeep Grand Cherokee?

It is slanted so that the top of the knuckle points “toward” the rear of the Jeep. This is known as “caster” and is a measure of the distance between two lines where they meet the ground. I’m not going to try to explain it here as I don’t have pics and I don’t feel like typing a novel.

Navigation