Is it safe to lift one side of a car?
Although it is possible to jack up a car on any of its left or right sides, it is much better to do so from either the front or back of the car which accords greater stability. As a rule of thumb, never jack up a car on anything except on level and flat ground which preferably should be concrete structures.
Can a car be supported on a tilted Jack stand?
A tilted jack stand may collapse, as it is not designed to hold a load at an angle. Once your car passes the shake test, it is safe to work on your car . Only Start Maintenance or Repairs with the Car Safely Supported on Jack Stands.
Where is the jack stand on a car?
The jack stand support locations (pinch welds; Photo 2) for cars are usually located behind the front wheels and in front of the rear wheels. Place the jack directly under the truck’s front lift point. Place the jack stand directly under the truck’s frame.
Can you jack up only one side of a car?
While it’s possible to jack up one side only, the vehicle will be more stable if you jack up the front or rear as one unit and support it as such. Note how this car is supported where multiple structural members meet – this is a very strong area on any vehicle.
Can you put a jack stand under an axle?
Have no fear of putting your jack stand directly under an axle (especially in the rear). The axle tube is fully capable of supporting the load. Just place the jack stand as near as possible to the spring mount area as possible. In the front, it’s a different story.
A tilted jack stand may collapse, as it is not designed to hold a load at an angle. Once your car passes the shake test, it is safe to work on your car . Only Start Maintenance or Repairs with the Car Safely Supported on Jack Stands.
The jack stand support locations (pinch welds; Photo 2) for cars are usually located behind the front wheels and in front of the rear wheels. Place the jack directly under the truck’s front lift point. Place the jack stand directly under the truck’s frame.
What should you never do when using a jack stand?
When using a jack stand always let the vehicle’s weight onto the jackstand. Never presume that if the jack gives way the jackstand will catch the car. Also I always…after removing a wheel …slide it under the vehicle, enough so that if something goes wrong, the vehicle will fall onto the wheel and not crush vital parts on your car or you.
Have no fear of putting your jack stand directly under an axle (especially in the rear). The axle tube is fully capable of supporting the load. Just place the jack stand as near as possible to the spring mount area as possible. In the front, it’s a different story.