Is it possible to disarm a VTSs alarm?
If you leave the front doors unlocked, the alarm shouldn’t arm itself. If it is arming itself when the doors are not locked, there is likely a problem that needs to be repaired. You can disarm the VTSS by unlocking the vehicle with the key in either front door lock cylinder or using the Remote Keyless Entry (RKE) transmitters.
What to do if your anti theft system is locked up?
If the anti-theft system has locked up your engine, you won’t be able to start it. You’ll have to disable it with these steps. Step 1: Check for the anti-theft light. It’s located on your dash and will have a blue or red light. Step 2: Turn the ignition to the “on” position.
Can You permanently disarm a car theft security system?
This will not permanently disarm the system, but must be done each time after locking the vehicle. If you want to permanently disarm the system, you will need to see a service center and discuss it with them.
When does the remote keyless entry ( VTSs ) work?
Active arming of the VTSS occurs when the Remote Keyless Entry (RKE) transmitter is used to lock the vehicle, even if the doors and/or the liftgate are open when the RKE transmitter Lock button is depressed. However, the VTSS arming will not be complete until all the doors and the liftgate are closed.
How is the VTSs engine no run disabled?
The VTSS engine no-run feature is disabled when it is shipped from the factory. This is done by programming within the Powertrain Control Module (PCM). Before a sale, the VTSS no-run feature is enabled by electronically advancing the PCM engine start counter using a DRB scan tool.
When does passive arming of VTSs take place?
Passive arming of the VTSS occurs when the vehicle is exited with the key removed from the ignition switch, the headlamps are turned off, and the doors are locked using the power lock switch. If any of these things are not true, it won’t arm passively.