Is it hard to change a snowmobile track?
Anyone with a basic understanding of their snowmobile, has an open work space, some tools and a little patience can swap out their own snowmobile track. In order to get your old track off, you will need to remove your rear suspension, some parts under the hood and the drive shaft.
Can a snowmobile track be repaired?
A snowmobile’s track is one of the most important parts of the machine. Repairing track is not something an amateur snowmobile mechanic should attempt, and it’s definitely not a duct tape type of operation if a track rips or tears. Serious rips, tears, and holes should be left to professional repair shops.
How do you put a skid back in a snowmobile?
Tip the sled on its side, with skid in track pull rear idlers until track and skid are 90*, install front bolts. Push skid/track assembly back into tunnel, Tip sled back upright install rear bolts. If you leave the rear springs off the lower slides( no tension on springs) the rear bolts go in a lot easier.
Where can I find the Polaris track fitment guide?
This will provide you with key information for selecting the correct replacement track for your Polaris snowmobile. The guide lists Polaris snowmobile models in alphabetical order. So your first option is to search by simply scrolling down looking at the left hand column for your model of sled and then checking the year column for the correct year.
How to replace the track on a Ski Doo snowmobile?
Remove The Rear Suspension Tip the sled on its side and remove the… To download the rest of the article, please visit our Downloads page and scroll to “Replace A REV Track” or click on the image to the left. This is a complete guide to remove and replace the track in Ski-Doo REV snowmobiles.
How do you find the track for a Polaris snowmobile?
Use it to shop with confidence for your replacement snowmobile track. In general, determining what snowmobile track will fit your Polaris sled will consist of determining what length, width, lug height and pitch will fit your sled. Once you determine these dimensions then you need to consider the conditions you ride in most often.
How long does it take to change track on Rev snowmobile?
Maybe you’re looking for better traction or perhaps you need to convert to a long track for a trip to the mountains. This story is based on Ski-Doo REV-based sleds, but the principles apply to all chain-driven snowmobiles. The job will take a first-timer about two hours, but after a few track swaps, it will take less than an hour. Step 1.
This will provide you with key information for selecting the correct replacement track for your Polaris snowmobile. The guide lists Polaris snowmobile models in alphabetical order. So your first option is to search by simply scrolling down looking at the left hand column for your model of sled and then checking the year column for the correct year.
How to remove and replace a snowmobile track?
Start by installing the drive shaft. Be sure that you insert the shaft with the bearing side first. Once the drive shaft is installed, continue installing the remaining parts in the reverse order of removal. Make sure that you refill the chaincase with the recommended oil. Now that you have everything back together, it’s time to test your work.
Use it to shop with confidence for your replacement snowmobile track. In general, determining what snowmobile track will fit your Polaris sled will consist of determining what length, width, lug height and pitch will fit your sled. Once you determine these dimensions then you need to consider the conditions you ride in most often.
Maybe you’re looking for better traction or perhaps you need to convert to a long track for a trip to the mountains. This story is based on Ski-Doo REV-based sleds, but the principles apply to all chain-driven snowmobiles. The job will take a first-timer about two hours, but after a few track swaps, it will take less than an hour. Step 1.