Is B16A a DOHC?

Is B16A a DOHC?

The length of B16A connecting rods is 134 mm. This ensured 1.6 liter displacement, and the R/S ratio was 1.735. The engine block is covered with the DOHC VTEC head.

What does Honda SiR mean?

The Si (Sport Injected) trim was introduced for the third generation of Honda Civics in both Japan and North America. In Canada and elsewhere, the trim became known as the SiR for the sixth and seventh generations, and the Si trim was equivalent to the USDM EX model.

What kind of engine is a Honda Integra B18C?

JDM B18C Type R 1 DOHC VTEC 2 Identification: PR3 stamp on engine head, top radiator hose connected towards back of head 3 Found in: 96-01 Honda Integra JDM Type R (DC2 & DB8) Rev-limit: 8900 rpm Redline: 8300 rpm Power: 197 hp (147 kW; 200 PS) at 8000 rpm & 178 N⋅m …

What are the specs of a Honda Civic B16A?

Here are cam specs of SiR B16A: duration (at .050″ or 1 mm lift) 230/227 deg, lift 10.6/9.4 mm. The power was 160 HP @ 7,600 rpm, torque was 150 Nm @ 7,000 rpm, and the redline was at 8,000 rpm. This engine was installed in Honda Civic SiR, CRX SiR and Integra. 2. B16A SiR 2 gen. is the Japanese version of B16A SiR.

When did the Honda B16A engine come out?

The B16A was first found in the 1989–1993 Japanese-spec Honda Integra RSi and XSi vehicles. It was also placed in the 1989–1991 Japanese-spec Honda CRX SiR and Honda Civic SiR/SiRII. The first generation of B16As was a 16-valve 4-cylinder with a displacement of 1595 cc, or just under 1.6L.

Is the Integra Type your engine the same as the B16A?

Note: This engine uses the same block as the Integra Type R (B18C5), which is taller than the B16a block (by approx 17 mm), but with a crank the same stroke as the b16a. It uses longer rods to accommodate for this, which is why the Rod/Stroke ratio is higher than a standard B16. Note: Only offered with SiRs with automatic transmissions.

What kind of engine does a Honda Civic b16a5 have?

6. B16A5 was a version for Honda Civic SiR with automatic transmission. The power was 170 HP @ 7,800 rpm, and the torque was 150 Nm @ 6,300 rpm. 7. B16A6 was an analogue for B16A2 Honda Civic for the countries of Middle East and South Africa.

What kind of engine does a Honda Integra have?

Today we will focus on one of these engines, Honda B16. It was started in 1989, and the first car with this engine was Honda Integra. The B16 cylinder block was made of aluminum, and its block deck height was 203.25 mm. Inside the unit, they installed a 77.4 mm stroke crankshaft with 81 mm pistons and 30 mm compression height.

Is the Honda B16B the same as the B18C?

Note that B16B has identical low and mid range power as B16A. As with B18C Spec R, the wonder of B16B is the assurance of a 15 to 25ps gain in power on a B16A provided the tuning done by Honda can be completely replicated.

How many miles does a Honda B16A engine have?

All of our Honda and Acura motors have no less than 35K and no more than 65K miles on them. What cars is the B16A engine compatible with? Buy in monthly payments with Affirm on orders over $50. Learn more Starting at $18 /mo with Affirm.