How to reset the perform service indicator system?
To reset the “Perform Service” indicator system (after performing the scheduled maintenance) refer to the following procedure: 1. Turn the ignition switch to the ON position (Do not start engine). 2. Press and release the brake pedal two times. 3. Fully depress the accelerator pedal slowly two times within 10 seconds.
How to reset perform service indicator on Dodge 6.7L?
This bulletin is to aid you on resetting the Perform Service indicator you will find on a Dodge 6.7L with the EVIC displaying this message. PERFORM SERVICE INDICATOR- RESET the “Perform Service” message will display on the EVIC each time you turn the ignition switch to the ON/RUN position to indicate emission maintenance is required.
How to reset maintenance light, reset oil service light?
How to reset maintenance light, reset oil service light. Can be made manually by use button on car dash board. Reset service light indicator Renault Safrane. It was built in years: 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000. 1. The reset button is located on the bottom right hand side of the Rev counter on the instrument cluster.
How to reset service light indicator Renault Megane 2?
How to reset service light indicator Renault Megane 2. 1. Switch ON the gnition, don’t start the vehicle. For cars with keycard ignition, insert the card, then push & hold the start button for 5 seconds to turn on the dashboard cluster. 2.
To reset the “Perform Service” indicator system (after performing the scheduled maintenance) refer to the following procedure: 1. Turn the ignition switch to the ON position (Do not start engine). 2. Press and release the brake pedal two times. 3. Fully depress the accelerator pedal slowly two times within 10 seconds.
How to reset maintenance light, reset oil service light. Can be made manually by use button on car dash board. Reset service light indicator Renault Safrane. It was built in years: 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000. 1. The reset button is located on the bottom right hand side of the Rev counter on the instrument cluster.
How to reset service light indicator Mercedes SLK 200?
Manual Reset Turn key in steering lock to position 2. Within 4 seconds press button (1) left of speedometer twice. Picture below. . The present status for days or distance displays, within 10 seconds turn key in steering lock to position O. Press and hold button (1), while turning key in steering lock to position 2 again.
This bulletin is to aid you on resetting the Perform Service indicator you will find on a Dodge 6.7L with the EVIC displaying this message. PERFORM SERVICE INDICATOR- RESET the “Perform Service” message will display on the EVIC each time you turn the ignition switch to the ON/RUN position to indicate emission maintenance is required.