How to replace the driver door lock on a Honda Accord?
1. Remove the driver door panel. The complete procedure for this can be found here: Removal of driver door panel on the 2003-2007 Honda Accord 2. Peel back the waterproof covering. Note the methods mentioned in the previous post on how to do this successfully without tearing the stuff.
Can you put the key into the driver’s side door lock?
I have noticed in the past 2 weeks, that it is becoming difficult to put the key into the driver’s side door lock. The lock works fine, but sometimes it takes a few attempts to get the key to go completely into the door lock. Sometimes, the key slides in just fine on the first try.
Why does my Honda CL9 lock and unlock?
If all but one door locks and unlocks then it is likely the Power Door Lock Actuator Assy for that faulty door. On my Honda CL9 (Euro and JDM Accord) the actuator was weak, intermittent, before going completely inoperative.
How to replace the driver door lock actuator?
Remove this plastic tab securing the cable to the interior driver door handle. You will need to do this by feel. Slip your hand behind, pinch and push the other ends of the plastic to come through the hole. 6. Remove this single screw holding the lock/unlock knob in place. 7. Disconnect these 2 electrical connectors to the actuator.
How to replace door lock cylinder 03-05 Honda Civic?
If playback doesn’t begin shortly, try restarting your device. An error occurred. Please try again later. (Playback ID: SXu-7t9DOqlKcUY1)
Why does my car door lock need to be replaced?
There are several reasons why a door lock actuator may need to be replaced. Sometimes a door lock actuator stops working completely. In some cars, a door lock actuator becomes noisy and produces a squeaking or buzzing noise when the power door locks are locked or unlocked.
Where is the relay on a Honda Accord?
Unplug the Honda Accord’s relay from the main relay socket, which is the base connected to the wiring. Keep in mind that the socket attaches to the relay via a tab that locks the relay to the socket.
What kind of screwdriver do I need to replace driver door lock?
You will now need to remove the 3 screws holding the lock mechanism on the jam area of the driver door (don’t worry if the description sounds weird you’ll get it from the following images). It is for these 3 screws that I advised using a chrome-vanadium screwdriver.
Where can I get parts for my Honda Accord?
Regardless of the Honda Accord OEM parts that you are in the market for, such as front brake rotors or door lock actuators, you can peruse our parts catalog at PartsGeek.com to find the Honda parts that you need to repair or even accessorize your Accord. delivery was very quick and I didnt pay extra.
What kind of arm kit does a Honda Accord have?
Front Replacement Control Arm Kit – for 2004 Honda Accord 2.4L 2354CC 144Cu. In. l4 GAS DOHC Naturally Aspirated – EX Coupe 2-Door
1. Remove the driver door panel. The complete procedure for this can be found here: Removal of driver door panel on the 2003-2007 Honda Accord 2. Peel back the waterproof covering. Note the methods mentioned in the previous post on how to do this successfully without tearing the stuff.
Which is the best part for a Honda Accord?
This part fits specific Honda Accord, CR-V, Odyssey, Pilot models. Affordable, reliable and built to last, Honda part # 90103S7S003 Screw, Flat (6X18.5) stands out as the smart option. Honda Parts Now is your prime online source with the biggest and best selection of genuine Honda parts and accessories at giant discounted prices.
Remove this plastic tab securing the cable to the interior driver door handle. You will need to do this by feel. Slip your hand behind, pinch and push the other ends of the plastic to come through the hole. 6. Remove this single screw holding the lock/unlock knob in place. 7. Disconnect these 2 electrical connectors to the actuator.
You will now need to remove the 3 screws holding the lock mechanism on the jam area of the driver door (don’t worry if the description sounds weird you’ll get it from the following images). It is for these 3 screws that I advised using a chrome-vanadium screwdriver.
How do you remove a shift interlock on a Honda Accord?
You’ve got to remove the head of your automatic Honda Accord shifter. To do this, there’s two screws on either side of the shifter, remove these to slide the shifter and shifter button of your shaft. Once you’ve got these screws out, go ahead and pull off the head of your Honda Accord shifter.
How do you take the center console out of a Honda Accord?
In order for the center console to come out of your car, the cubby hole under your Honda Accord stereo must be taken out. To do this, remove the screws that point upward through the cubbyhole mount points and into your Accord dashboard. Remove these two screws, and carefully remove your cubbyhole by pulling down and out.
How much does it cost to replace a Honda Accord door latch?
The interior and exterior door handles do not work to open the door. Our technicians note that the door panel must be removed while the door is closed (likely damage will occur) and the latch assembly must be drilled in a specific spot for the door to open. The average cost for a Honda Accord Door Lock Actuator Replacement is between $215 -$239.
What happens if the driver’s door latch breaks?
Share it! The driver’s door latch assembly can break internally, which causes the door to stay closed. The interior and exterior door handles do not work to open the door.
What to do if your Honda front door latch breaks?
It requires that your remove the plastic cover to the divider between the front and rear seats to have limited access to the front door panel. The door panel will need to be wedge open and a coat hanger modified to release the door latch. It is recommended that you practice on the replacement part before attempting.
How do you remove the security system from a Honda Accord?
A two-pin connector for the Honda Accord’s security system. Strip the rubber or plastic insulators from both ends of the wire, and then push each end into the female slots of the wire harness. Use a plastic zip tie to fasten the connector to the frame or completely remove the connector by removing the six screws holding it in place. Figure 3.
What kind of door latch cable do I need for 2005 accord?
Works great!! Works perfect for 2005 accord lx sedan right front passenger door. Be prepared to remove door lock assembly. The outside door cable latch is housed inside a plastic cover. Once you remove door lock assembly you can access housing to install new door latch cable.
Why is the driver side door latch not working?
Driver side door latch stopped working. Door will not open using the inside or outside door handle. There is a fix available without drilling into the car for sedans. It requires that your remove the plastic cover to the divider between the front and rear seats to have limited access to the front door panel.