How to replace indicator stalk on Honda Jazz?
It looks it is not an easy job as it requires to remove the airbag and the steering wheel. Haynes manual confirms that you should take off the wheel as the switches slide back off as a unit, then you separate them left or right. @springmichael: Is this a GD1,3 or 5 model (check against 4th, 5th and 6th digits of the VIN)?
How can I find out if my Honda Jazz is in a recall?
If you are unsure if this issue has been dealt with on your car, go to the Honda UK website and navigate to the recall page. If you enter the VIN number there, it should tell you if there are any outstanding recall work on the car. Hope this helps in the meantime.
How often to change the wiper blades on a Honda Jazz?
How often to change the Wiper Blades on your HONDA JAZZ . Recommended service and replacement schedules Jazz Hatchback (GE, GG, GP, ZA) (10
When did I remove the radio from my Honda Jazz?
Here is a video showing how to remove the factory radio to the Honda Jazz/Fit from 2002 to 2008. Installation of iPod/USB or AUX-in connection or accessing the heating/ventilation controls to replace a bulb will also require removing the radio.
Which is the best battery for a Honda Jazz?
If you aim to keep the car for a while and have peace of mind Halfords now sell a Yuasa Silver battery for £79 – HBS154 40A/h and 340CCA guaranteed 5 years 50,000 starts which is much better than standard battery and the same physical size (HB154 33AH and 270CCA price £59 guarantee 3 years 20,000 starts).
What happens when you drain the battery on a Honda Jazz?
In fact it is advisable not to use too many revs when the battery charge is low. In the old days of the good old dynamo, many a customer came a whoopsey after draining the battery, then bump starting only to have the dynamo melt all the solder inside as they revved the engine to ‘charge’ the battery.
How do you remove the Speaker from a Honda Fit?
To remove the speaker from the door take out the screw and then gently pull on the speaker until the sticky foam on the back side gives way. The power connector on the back of the speaker can be released by squeezing together the two clips and pulling the connector straight off the speaker.