How to install an aftermarket radio in a car?
Installing an Aftermarket Car Stereo. 1 Step 1 – Purchase the Radio. First thing you need to do is measure your current stereo and the space it fits into. Then using the measurements, 2 Step 2 – Disconnecting the Radio. 3 Step 3 – Removing the Dash Cover. 4 Step 4 – Wiring Harness. 5 Step 5 – Connecting Your Stereo.
Do you need dash kit to install aftermarket stereo?
Some vehicles require a dash kit to allow the aftermarket stereo to fit in the car. Follow the instructions in the dash kit and the installation is easy. Most online dealers will offer these kits and a wiring harness free when you buy a stereo. Thanks!
Where do you plug in an aftermarket stereo?
The wires on the harness adapter and plug are usually color coded or tagged for easy identification and matching. Connect the aftermarket stereo. Now that the wiring harness adapter is plugged into the wiring harness and attached to the stereo plug, all you need to do is plug it into the back of your stereo.
How much does it cost to install a car radio?
With most newer cars, the radio should be able to broadcast the satellite radio and no equipment will be necessary. According to the website SatelliteRadioUSA.com, the cost of a plug and play receiver is going to cost $100 to $150 while the installation kit will be around $40 to $75.
How can I upgrade car radio?
Method 1 of 3: Upgrading Your Head Unit Select a new head unit. There are many brands and options out there. Buy the wiring harnesses for your head unit and your vehicle. Match the colors on the harnesses or follow the included diagram. Purchase a service manual for your car. Unhook your battery’s ground terminal. Remove the original head unit. Unplug the wiring harness.
How do you install a car stereo system?
Installing the New Stereo Match up the wires. Assemble the mounting kit. Connect the power source. Ground the stereo. Connect the remaining wires. Test the stereo.
How do you wire a car stereo system?
On the car stereo, twist the red and yellow wires together. After you do that, connect the black ground wire on the stereo to the black wire on the pin connector. The stereo’s red and yellow wires connect to the connector’s yellow wire. You then follow the typical instructions to hook the stereo up to your speakers.
Can a factory stereo be removed from a car?
Remove the factory stereo. Once any necessary pieces of dashboard have been removed you can take out your stereo. Sometimes the stereo is bolted or screwed onto the dash and sometimes you will need to use special tools that are inserted into the face of the factory stereo to release it from the dashboard. This procedure will vary from car to car.
Some vehicles require a dash kit to allow the aftermarket stereo to fit in the car. Follow the instructions in the dash kit and the installation is easy. Most online dealers will offer these kits and a wiring harness free when you buy a stereo. Thanks!
What kind of adapter do I need for aftermarket radio?
The aftermarket wiring harness adapter is specifically designed to fit your vehicle’s wiring harness. This allows you to simply plug the new harness adapter into the factory radio harness and makes wiring your stereo fairly straightforward. Connect the new radio’s plug to the wiring harness adapter.
Where do you plug in a car stereo?
Plug the wiring harness into the back of your stereo. Your old stereo should only have one wire left and you can now take that and plug it into your new stereo. This should be your antenna. Slide your stereo into the spot in the dash. Before you secure it, test it to be sure it works.
Can you install an aftermarket audio system on your own?
Yes, it is quite possible to install an aftermarket car audio system on your own. It’s not that difficult to manage without professional help. That said, the installation process varies based on what type of stereo you will be using. If you are going to use a single DIN car stereo, it won’t take that long.
What should I look for in an aftermarket stereo?
The focal point of getting good aftermarket stereos is picking one that can provide the best sound quality. If you want to use your car stereo to power the speakers, you’ll want a device that has a large efficiency rating. This is called the “sensitivity” or “SPL” rating.