How to disable the Check Engine light permanently?

Turn the automobile on and off thrice. To disable the check engine light permanently in some automobile, they will robotically reset the problem codes that triggered the earliest fault after the car is put on and off thrice in progression. You have to turn on your ignition.

Where do you find the Check Engine light codes?

P0101 Mass or Volume Air Flow Circuit Range/Performance Problem P0103 Mass or Volume Air Flow Circuit High Input P0104 Mass or Volume Air Flow Circuit Intermittent P0105 Manifold Absolute Pressure/Barometric Pressure Circuit Malfunction P0106 Manifold Absolute Pressure/Barometric Pressure Circuit Range/Performance Problem

How to read and understand check engine light ( OBD )?

You will need an OBD scan tool. The scanner allows you to communicate with the computer and retrieve the trouble codes. Certain scanners may give information on what the revealed code means, but most will just give a five digit number and letter combination. Follow these 4 steps to insert and read the OBD scanner:

What does a 4 and 5 mean on a check engine light?

A “4”refers to emissions system problems, like a catalytic converter efficiency issue. A “5” indicates vehicle speed controls and idle control system problems. A “6” refers to computer output circuit issues, like an internal computer failure.

How can I Reset my Check Engine light?

Check engine light can be reset by clearing the codes with an OBD2 scanner or disconnecting the battery. Both methods clear all the Diagnostic Trouble Codes (DTCs) from the On-Board Diangntoic computer at least temporarily. This procedure also reset the various systems in the car to Not Ready state.

What is the DTC code on a check engine light?

Diagnostic trouble codes (DTC) are automotive computer codes stored by the on-board computer diagnostic system (OBD) in your vehicle. There are literally hundreds of different codes a Check Engine Light can represent.

What does the you mean on a check engine light?

The letter “U” indicates network codes which are used for problems like module failures and losses of communication. Note: Only professional-grade or dealership scan tools are able to diagnose codes outside of powertrain codes. Step 3: Determine if the codes are Society of Automotive Engineers (SAE) codes or manufacturer-specific.

Where do you find the SAE code on a check engine light?

This is indicated by the first number in the sequence, immediately after the letter. SAE codes are generic codes that apply to all makes and models. SAE codes are indicated with a “0” as the second digit. Manufacturer-specific codes use a number other than “0” as the second digit.

How to turn off service engine soon light?

The simplest and the safest way to turn off check engine light soon is by using an OBD2 scanner which can be obtained from any auto shop. The scanner will retrieve the error code and clear it completely. 1. Connect the Scanner

How to remove the Check Engine Light Fuse?

To remove check engine light fuse, you can use a code spanner or you can simply unplug the battery. On-Board Diagnostics (OBD) scanners are most appropriate for automobiles manufactured after 1996. For automobiles produced after the 1990s, they may not have an OBD port beneath the control panel.

How to turn off Check Engine light in Toyota Corolla?

Normally, what your service technicians who service your vehicle will do is to diagnose the car or turn off the check engine Toyota corolla light. But in case they forgot to do so, then it’s very easy for you to take care of it on your own. Just follow these steps below: Use your key and turn on the ignition so that the car will be on.

How do you turn off the Check Engine light?

How to Get Rid of the “Check Engine” Light 4 Ways to Turn off the “Check Engine” Light 1. Drive Your Car and Let the Light Go off by Itself 2. Turn the Car on and off Three Times 3. Disconnect and Reconnect the Battery 4. Use an OBD Code Reader

Why do check-engine lights come on and go off?

Occasionally, the check engine light comes on when nothing is wrong with the car, said Steve Mazor, chief automotive engineer for the Auto Club of Southern California. It could be a temporary problem caused by a change in humidity or other factors. In such cases, the light should go off by itself after a short time.

Why does the Check Engine light come on while driving?

A loose fuel cap is one of the most common reasons why the check engine light turns on. The cap is a crucial part of a car’s fuel delivery system. It notably prevents gasoline fumes from leaving the fuel tank, and it helps keep the whole system under the correct pressure.

What does service engine light mean?

The Service (or Service Engine) light is a warning light that is connected to the engine control unit (ECU) of a vehicle. The ECU is the brain of the car and monitors a number of systems, including: Emissions: There are sensors throughout the engine management system on all cars manufactured since 1996…

Is there a fix for the VSC light?

This fix for check engine and VSC lights is both simple and cheap. It’s important to note that this article pertains to 4th gen (2003-2009) Toyota 4runners with these specific diagnostic codes. This is likely a common issue with many other vehicles as well, but you’ll need to confirm the problem.

What is the code for the Check Engine light?

The C1201 code is the one that tells the vehicle to turn on the check engine light and disable the traction and VSC. Basically, when the other two codes pop up, this one is in charge of letting you know there’s a problem.

Why does my check engine light turn on?

Check Engine Light Turns On An illuminated Check Engine Light is one possible symptom of a problem with the ECM. The Check Engine Light usually illuminates when the computer detects a problem with any of its sensors or circuits. There are cases, however, where the ECM illuminates a Check Engine Light mistakenly, or when there is no issue present.

Is it against the law to disconnect check engine lights?

Unfortunately, disconnecting check engine lights is against the law, because it’s considered tampering with the factory emission control system. If you do this in states with emission system testing they will be able to easily detect a disconnected engine warning light.

Where is the VTEC on a Honda Accord?

The VTEC solenoid is located at the back of the engine on the left side. In the picture below, it is about 8 inches behind the orange oil dipstick. Here is the view from behind. You can see the VTEC near the center of this image with a bunch of wires going to it.

Is there a way to disable AUTO CHECK disk?

There are people who suggest editing the registry to do this which works if done properly, but the recommended and safer way to disable auto Check disk from starting up is using the /x switch via the chkntfs command in Command Prompt.

Is there a way to disable item checkboxes in File Explorer?

It is also possible to disable Item checkboxes using folder options in File Explorer. To do so, open a File Explorer window and click “View” on the toolbar. Click the “Options” button, and you’ll see the Folder Options window. Scroll down the list until you see “Use Check Boxes To Select Items.”

How do I remove a checkmark from a file?

In the ribbon bar at the top of the File Explorer window, click the “View” tab. Locate “Item Check Boxes” in the View toolbar and click on it. It the feature was enabled, the checkmark in the box beside each file will disappear. Once you select files, they will no longer display a checkbox beside them.

How to permanently turn off Windows 10 update?

How do I permanently turn off Windows Update 1 Disable all Windows update service. 2 Change the Group Policy. 3 Change the Registry Editor to stop Windows update. 4 Disable Windows update tasks. See More….

Is there a way to turn spell check off?

To avoid that distraction, you can turn spell check off, then check spelling manually when you’re done writing. Here’s how. Click File > Options > Proofing, clear the Check spelling as you type box, and click OK. To turn spell check back on, repeat the process and select the Check spelling as you type box.

How to turn off or turn off Microsoft Defender?

Computer Configuration > Administrative Templates > Windows Components > Microsoft Defender Antivirus. Double-click the Turn off Microsoft Defender Antivirus policy. Source: Windows Central. Select the Enabled option to disable Microsoft Defender Antivirus.

When does the Check Engine light come on?

Your check engine light (CEL) naturally triggers on once it spots a hitch with your emission control system. The check engine light produces a cypher that can help you detect the error in your automobile for easy rectification. It may require you to manually reorganize the light after maintenance if the code refuses to automatically resolve.

What does it mean when your engine hesitates under load?

An engine that hesitates, stumbles or misfires when accelerating or when it is under load, is an engine that is either sucking too much air, not getting enough fuel, or misfiring. If the Check Engine Light comes on, you may find any of the following codes: P0171, P0174 Lean fuel condition codes P0120 to P0124 Throttle position sensor codes

What does it mean when your check engine light says gas is leaking?

If you get an error pointing to the gas cap, it means fuel vapors are leaking out of your cap. This means it’s either cracked or just wasn’t tightened well enough.

What causes the Check Engine light to turn off?

The error codes should be deleted which will cause the engine light to turn off. (Note: this method may not word on all car computers). In case, the car battery is disconnected and the light comes right back on, this may show an active problem and should be addressed and fixed.

Is there a way to reset the Check Engine light?

Using a scan tool is the easiest way for check engine light reset. If you wonder to know how to turn off check engine light by this way, here are 3 steps for you. Connecting the scan tool to the OBD- II ( On- board diagnostic connector) under your steering column.

Why is my Check Engine light flashing and car shaking?

If your car’s control system discovers problems that it cannot handle, the check engine light will turn on. In addition, the computer will have a trouble code stored in the memory. The code’s main function is to determine the origin of the problem. To read the code, you will need a diagnostic computer or an electronic scan tool.

If you get an error pointing to the gas cap, it means fuel vapors are leaking out of your cap. This means it’s either cracked or just wasn’t tightened well enough.

How to turn off check engine without scanner?

– YouTube 3 ways to turn off CHECK ENGINE without scanner EASY!! If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. An error occurred while retrieving sharing information.

How long does it take for the Check Engine light to reset?

How long does it take for the check engine light to reset? If you are sure you have fixed the problem, it takes around 10-30 successful cycles before the check engine light disappears. One process is one cold-start until the engine is warm.

What should I use to diagnose lean running engine?

Use only high-quality, low-lint air filters, and beware of aftermarket filter housings or “tornado” devices which may disrupt the laminar airflow required for accurate MAF sensor performance. Also, be sure to check the MAF sensor’s wiring.

Why does the Check Engine light keep blinking?

When the ECU ( engine control unit) detects a problem that it is unable to regulate, it then turns on the check engine light on your dashboard. This check light will either keep on glowing or will blink, depending on the nature of the fault. If the engine check is on regularly then it means that there is a problem but not an emergency.

Is it safe to drive with the Check Engine light on?

It could also mean your catalytic converter has given up the ghost. The check engine light means there’s a problem somewhere in your emissions system. Regardless, you’re safe to drive for now as long as the car isn’t performing strangely. Just have the check engine light checked and the problem repaired.

What does it mean when your check engine light goes out?

Drive the car for a while and see if the light goes out (note that it may take a couple of restarts of the engine to make the light go out). If your car’s Check Engine Light is on, it means that there’s a problem somewhere in your emissions system.

What should I do if my car engine is not working?

Modern cars have great monitoring for all the different car sensors on the engine. If one sensor has failed or if one sensor picks up that something is not quite right with the engine, it will send the information to the engine control unit. When the engine control unit receives the data, it will decide if the problem is serious or not.

Is it OK to drive an engine that is misfiring?

Instead from that, misfires can damage other sensors in the engine like the O2 sensors. So, I would never recommend driving an engine that is misfiring for any long distances. Short distances to your mechanic workshop without putting a load on the engine is fine, but do not ignore the misfires and keep driving.

Is the Check Engine light on in my Mercedes?

Has the check engine light turned on in your Mercedes-Benz C-Class, E-Class, GLA, GLC, GLE, ML, or SL? It can be alarming seeing an engine warning appear on your dashboard, especially if you’ve never seen it before.

What does it mean when your check engine light is blinking?

The check engine light is blinking while driving: Not to be confused with the light occasionally flickering in the first situation, if your check engine light is blinking consistently that typically indicates there is a major issue with your vehicle and you should pull over when safe.

Is there a way to permanently delete the engine codes?

You can permanently delete the engine codes by making use of an OBD2 Scanner. They can easily tell you if there’s any fault. Open the hood and separate the (-) black cable from the battery whilst using a simple wrench to slacken the clamps.

What does a check engine light mean on a Mercedes E320?

A check engine light can indicate a broad spectrum of problems with your 2005 Mercedes-Benz E320. In some cases you need to pull over immediately to prevent damage while in others you merely need to tighten you gas cap next time you stop in order to reset the service engine soon light.

What to do if your check engine light is flashing?

Flashing Check Engine Light: If your check engine light is flashing, stop driving your E320 and have it towed to your nearest mechanic – you probably have a very serious problem with your car and you risk ruining your engine by driving it.

Can you change the parking light on a Mercedes E320?

2005 Mercedes-Benz E320 CDI 3.2L 6 Cyl. Turbo Diesel Change the parking light Small bulbs that burn out regularly – did you know you can replace these with LED lights? 2005 Mercedes-Benz E320 CDI 3.2L 6 Cyl. Turbo Diesel See all videos for the 2005 Mercedes-Benz E320

How to contact Mercedes Benz check engine lights?

If you any additional questions regarding check engine lights, please give us a call at (713) 489-2111 to speak with one of our teammates, or simply schedule an appointment with our online form.

Why is the check engien light on on my Mercedes?

They measure the unburned oxygen. If your Check Engien Light is on because of O2 sensor you may be getting poor fuel economy as well. The input values from the O2 sensor are used to adjust the fuel delivered to the engine. You can get O2 sensors at a fraction of dealer prices on Amazon, that will fit Mercedes Benz. Check this one here for example.

Why is my Check Engine light still on after filling up?

The cap is a crucial part of a car’s fuel delivery system. It notably prevents gasoline fumes from leaving the fuel tank, and it helps keep the whole system under the correct pressure. If your check engine light turns on immediately after a fill-up, pull over and make sure the cap isn’t loose — or still on your car’s roof.

What does it mean when check engine light is on but no codes?

No code being generated on the reader does not mean the driver is in the clear. In fact, when the light is on, the odds are just as high that there has actually been something wrong for a while even if no code is generated.

What should I do if my check engine light keeps flashing?

The first thing you should do if the check engine light is flashing or is constant on your dashboard is to read the trouble code memory. When the engine light is lit up, and the engine control unit recognizes a problem with the engine, the engine control unit will store a trouble code in the memory.

When does the Check Engine light come on on a Mercedes?

It illuminates when something requires the attention of a mechanic, or to remind you of periodic service needs. The light is designed to come on when the vehicle passes certain mileage limits. You can reset the “check engine” light on your Mercedes within a few minutes.

What does a faulty check engine light mean?

It helps monitor how much fuel is burned. A faulty sensor means it’s not providing the right data to the computer and causes a decrease in gas mileage. Most cars have between two and four oxygen sensors; the code you get from the scanner will tell you which one needs replacing.

How long does it take for check engine light to go off?

If you are sure you have fixed the problem, it takes around 10-30 successful cycles before the check engine light disappears. One process is one cold-start until the engine is warm. Will the check engine light go off by itself? Yes, The check engine light will reset itself after a fixed amount of time if you fixed the problem in most car models.

Is it possible to reset an engine warning light?

While the documentation for some older cars provided instructions on how to check and reset engine warning lights, it’s not usually possible now cars have grown more sophisticated. It’s well worth paying for accurate diagnosis, though, so a proper and effective repair can be made.

Is there a service required check engine light?

Mechanics will have a plug-in diagnostic tool that will display the issue to them. Some rare cars may require a dealer to read off certain fault codes, they will have specialist equipment for those vehicles. Remember, a “service required’ light is not to be confused with a “check engine” light, however, these are related.

How to reset the Check Engine light on your car?

How to Reset the Check Engine Light. 1 Drive Till it Turns Off. This is the easiest way. Your vehicle’s sensors will generally recheck the problem that led to the CEL. If you’ve fixed the 2 Turn the Car Off and On 3 Times. 3 Disconnect and Reconnect the Battery. 4 Use an OBD Reader.

Can a code reader fix a check engine light?

Most code readers will allow you to turn off or reset the check engine light. But this action alone does not actually repair the underlying problem. In many cases, the light will simply come back on later.

Is it safe to drive with check engine light on?

Sometimes, multiple sensors send signals, indicating clues that something bigger has gone awry. You can still drive with the light illuminated, assuming the car is running and driving fine, but you should get it checked out as soon as possible.

How do you read the Check Engine light?

Connecting the scan tool to the OBD- II ( On- board diagnostic connector) under your steering column. Then you turn the ignition switch to ON and don’t forget to turn of all gadgets. Pressing the “READ” button on the scan tool to see the error codes of the engine.

Why does my check engine light keep coming on?

A code reader can help you by manually allowing you to clear the fault code that has caused the check engine light to illuminate (in case it was stuck on due to an error in the car’s computer), or if there truly is something mechanically wrong then it can give you the “error code” that your car is producing.

How long does it take for check engine light to reset?

It can take about one week for the engine light to reset on its own once you tighten the gas cap. Alternatively, you can reset it yourself using an OBD2 scanner. Check engine oil level by turning off the engine and waiting for at least 15 minutes before opening the hood.

Why does my check engine light not light up?

If your Check engine light is ON, the easiest way to diagnose this problem is to always check your trouble code memory with an OBD2 scanner. The check engine light will not light up if there is a scheduled service as the service engine soon light.

What are the warning lights on a Mercedes Benz?

The following are warning lights and indicators found in vehicles built by Mercedes Benz. Click a link to learn more about each one. They are roughly ordered by importance, which tends to be by color (red, amber, yellow, orange, green, blue, gray), but there are over 40 of them so be patient!

Where is the Def heater on a Bluetec Mercedes?

It is located underneath your Mercedes, next to the DPF. It is relatively easy to replace. Follow this guide to learn how to change Mercedes DPF Pressure Sensor. DEF heater is another known weak points. All Bluetec vehicles use Diesel exhaust fluid, also known as AdBlue. It is stored in an external tank, and it would freeze in cold weather.

How do you reset the Check Engine light on a Mercedes?

The light is designed to come on when the vehicle passes certain mileage limits. You can reset the “check engine” light on your Mercedes within a few minutes. Insert the key in the ignition switch and turn it without starting the car. Pay attention to the display on the instrument cluster between the speedometer and the tachometer.

How to get rid of the ” Check Engine ” light axleaddict?

If it does not go off, then your engine has a problem. 1. Drive car and let light go off by itself. 2. Turn engine on and off three times in a row. 3. Disconnect and reconnet the battery. 4. Use an OBD code reader. 1. Drive Your Car and Let the Light Go off by Itself

When to reset the Check Engine light of the Chrysler?

It’s inadvisable to reset the check engine light if the underlying problem hasn’t been addressed. If you do, the light will simply come back on. Retrieve the error code and tackle the problem before attempting to reset the light.

What does it mean when check engine light comes on?

Anytime a check engine light is illuminated, it means the onboard computer (ECU) has detected a fault from a sensor that impacts the operation of the vehicle. It then stores a code in the ECU which can be downloaded by a professional mechanic, which should isolate the source of the failure and allow them to tell you why the car is not starting.

Where is the Check Engine light on a Honda?

Turn the key into the “off” position if either of these occurs. Figure 1. A steady check engine light. (Related Article: Warning Lights – Honda-Tech.com) In the passenger’s side foot well, remove the kick panel by the side door. This will allow you access to the Engine Control Unit (ECU) and jumper plug (service connector).

The “check engine” light does not come on. When you turn the ignition ON before starting the car, the “Check engine” light is supposed to come on indicating that the engine computer (also could be called ECM, PCM, or ECU) is powered on.

Why does my engine light not come on?

The light should come on when you turn the key to “ON,” and it should go out after the engine starts. If it NEVER comes on I’d suspect the bulb. Most CELs ground through the ECM so if the first suspect bulb is good then there could be an ECM fault. Hopefully it’s the bulb.

What should I do if my car won’t start?

In most modern cars, only an authorized dealer can reprogram the key. Your dealer can also check the immobilizer system. When you turn the ignition ON before starting the car, the “Check engine” light is supposed to come on indicating that the engine computer (also could be called ECM, PCM, or ECU) is powered on.

What to look for when your engine won’t start?

Check for a blown fuse that may be preventing a circuit from working properly, like the fuel injection or computer system. To operate efficiently, an internal combustion gasoline engine needs a good spark, the right amount of fuel, and good compression (a healthy mechanical condition).

What causes the Check Engine light to come on?

My car has an automatic transmission. Hi there. In many cases, when you have an issue with the car accelerating and the check engine light comes on, it’s caused by a mechanical problem with either a drive-system, fuel or ignition system component. The light is triggered when a sensor detects a fault somewhere in the car.

Can a low oil level cause a service engine soon light?

Yes, Low engine oil level can cause the service engine soon light to appear on your dashboard on a lot of car models. It can also mean that other low fluid levels are low or other problems with the car. It is relatively easy to check the oil level, though, so you should definitely begin with it.

Can you drive with a blinking check engine light?

How far can you drive with a blinking engine light? It is not recommended to drive at all with a flashing check engine light. You can, in most cases, drive the closest way to a repair shop. We do recommend towing it if the repair shop is located far away, though.

How do you reset the fuel gauge on a car?

If this happens, reset your fuel gauge. Each make and model of car has its own specific instructions on how to reset the fuel gauge, but the process is basically the same. Turn the ignition switch to the “On” position. Press the “Odo/Trip” button until the odometer is put into “ODO” mode. Turn off the ignition.

Why does my check engine light go off at night?

kwangmoo/123rf. An aftermarket alarm can wreak havoc on your car if it’s not installed properly. It can drain the battery, trigger the check engine light, or even prevent the vehicle from starting. Then, when you least expect it, it’ll go off in the middle of the night because a leaf from an oak tree fell on the hood.

Where to plug in the Check Engine light?

Plug the reader into the OBD port of your vehicle. This port is usually located on the underside of the dash area just above the foot well. On some vehicles, you’ll have to remove the door on your fuse box to access this port. Once you have connected the reader, press the “enter” button to turn it on.

How does a check engine light work on a car?

Whether you are buying from a car lot or an individual, put the key in the ignition and turn it just enough to light up the dash, but not far enough to start the vehicle. All the lights on the dash should turn on, and stay on whether there is a problem with any of these parts of the car or not.

How do you erase a check engine code?

To perform this method: Plug the reader into the OBD port of your vehicle. Once you have connected the reader, press the “enter” button to turn it on. The device will scan your engine for any error codes. Now you can press the “scroll” button to find the option to erase the code.

How can I Cross Check my Check Engine?

Once you have connected the reader, press the “enter” button to turn it on. The device will scan your engine for any error codes. Once done analyzing, the reader will display any error codes it finds. Make note of the codes (if any) if you wish to cross check them in the code reader’s manual or online.

How do you reset the Check Engine light on a Nissan?

After repairs are complete, the SES light must be reset. The SES light in a Nissan is frequently called a check-engine light in other makes. Open the driver’s side door and get into the drivers seat. Insert the key into the ignition and turn it a quarter turn so the ignition turns on, but the engine doesn’t start.

How to reset check engine light with OBD-II?

1 Connect the scan tool to the OBD – II Connecting the scan tool to the OBD- II ( On- board diagnostic connector) under your steering column. 2 View error codes by pressing the “READ” button Pressing the “READ” button on the scan tool to see the error codes of the engine. 3 Remove the error code

Where is the Check Engine light on a car?

This port is usually located on the underside of the dash area just above the foot well. On some vehicles you’ll have to remove the door on your fuse box to access this port. Once you have connected the reader, press the “enter” button to turn it on. The device will scan your engine for any error codes.

How do you reset the Check Engine light on a Subaru?

Open the hood of your Subaru and loosen the nut that holds the cable clamp to the negative battery terminal. Slide the cable off the negative battery terminal. Wait 5 minutes, then reconnect the cable and tighten the retaining nut. Start the engine and wait for the Subaru’s computer to reset the check engine light.

Why does my check engine light come on?

The Subaru check engine light comes on when there is a problem with the Subaru’s emissions control system. The Subaru’s computer, called an ECU, generates fault codes that pertain to various sensors on the vehicle. If one of these sensors fails, it will trigger a fault code.

What causes the engine light to turn off?

Is it okay to drive with a flashing check engine light?

It’s never recommended to drive with a flashing check engine light. A constant check engine light can be okay to drive with sometimes, but a flashing engine light is most likely a more serious problem that has to be fixed as soon as possible.

How often does Freightliner engineprotect light come on?

35 people found this helpful. I have a2002 Freightliner engineprotect light comes on every now and then but has not shut off yet not sure what it may be is ecm going out have not driven truck far do you have any ideals 49 people found this helpful.

Where do I find the Check Engine Light code?

Then, press the “read” button on the scanner to access the check engine light code. The code will be a series of letters and numbers. Record all of the codes so you can figure out what they represent and make the necessary repairs to your vehicle.

What does the engine management warning light mean?

The engine management warning light is different from the other lights on your dashboard, as it doesn’t alert you to a specific fault. Unlike the coolant temperature warning or low oil level warning lights, the engine management light (EML) can be triggered for a number of reasons.

How to retrieve trouble codes on your EEC-IV system?

Start the truck and let it run at 2000 RPM for 2 minutes to warm the sensors. Turn off the engine and reconnect the jumper between the STI and DLC Connectors. Wait 10 seconds between the time you shut the truck off until you start it again. Start the truck.

How to reset check engine light with scan tool?

Use A Scan Tool 1 Connect the scan tool to the OBD – II Connecting the scan tool to the OBD- II ( On- board diagnostic connector) under your steering column. 2 View error codes by pressing the “READ” button Pressing the “READ” button on the scan tool to see the error codes of the engine. 3 Remove the error code

Navigation