How to adjust the valves on a 2001 Yamaha Kodiak?
Routine valve adjustments will compensate for the changes in the valves’ clearance caused by normal usage. Remove the seat from your Kodiak, using the latch on the rear of the seat. Pull the gas tank side covers off your Kodiak’s frame. Unscrew the gas cap.
What’s the best way to adjust a valve?
Turn the adjuster bolt clockwise with a flat screwdriver to reduce the valve’s clearance or turn it counterclockwise to increase the valve’s clearance. Check the valve clearance again with a .0039-inch feeler gauge. Hold the adjuster bolt steady with your flat screwdriver and tighten the lock nut against the rocker arm with your 10 mm box wrench.,
Why does my motorcycle engine need a valve adjustment?
Overheating is another possible sign of an engine in need of a valve adjustment. This can be caused by valves with too little clearance. This lack of clearance causes the valves to close slower than they should. In other words the valves are open too long.
How many valves does a motorcycle engine have?
All engines will have at least two valves per cylinder, one intake for taking in a mixture of fuel and air, and one exhaust for removing air and any leftover fuel after the combustion stroke. Equally important to your engine is the valve’s seal when it is not open.
How to adjust the valves on a Yamaha road STAR Motorcycle?
Pull the spark plug wires off the spark plugs and secure them out of the way with nylon ties. Remove the valve covers from both cylinders using an Allen wrench to loosen 14 bolts on each cover. Set the bolts and covers aside. Remove the spark plugs using a plug wrench and set the plugs aside.
Routine valve adjustments will compensate for the changes in the valves’ clearance caused by normal usage. Remove the seat from your Kodiak, using the latch on the rear of the seat. Pull the gas tank side covers off your Kodiak’s frame. Unscrew the gas cap.
How to change the oil on a 2005 Yamaha Kodiak 450?
Press the plastic post on the top of the panel into the rubber grommet on the side of the fuel tank. Lock the seat into place. Start the ATV and let it idle in place for a few minutes before beginning to warm the oil. Warm oil will drain faster and help to carry out any trapped debris within the motor.
How to troubleshoot a Yamaha Kodiak 450 ignition system?
Purchase an in-line spark tester and throw it on to see how your spark is doing. Last thing is your pick up coil gap. Take a look at that and see what the spec is in the manual. Check the gap you have and compare the two. Oh gosh. This is homework for me. Never really caught on to the electrical side of atvs..
What are the specs of a 2005 Yamaha Kodiak?
2005 Yamaha Kodiak 450 Auto 4×4 pictures, prices, information, and specifications. Below is the information on the 2005 Yamaha Kodiak 450 Auto 4×4. If you would like to get a quote on a new 2005 Yamaha Kodiak 450 Auto 4×4 use our Build Your Own tool, or Compare this ATV to other Utility ATVs.