How often should you change oil in a 2020 Kia Sorento?
every 3,000-5,000 miles
Kia recommends getting your 2020 Kia Sorento oil & filter changed every 3,000-5,000 miles, but it’s premium to check your owner’s manual and with your dealer to find out the intervals that work premium for your vehicle.
What do I need for an oil change on a Kia Sedona?
The tools needed to complete this oil change procedure include a 17mm socket with a 3/8″ drive ratchet, a 27mm socket with a 1″ drive ratchet, a floor jack, two jack stands, a used oil catch container, an automotive funnel and 6.02 U.S. quarts of new SAE 5W-30 oil.
Where is the oil filter cap on a Kia Sedona?
The engine cover is held in place by four rubber friction fasteners attached to metal pegs on the top of the engine. Locate the round black plastic oil filter cap at the right (driver) side of the engine. To remove the oil filter cap, you’ll need either a 27mm or a 1 1/16″ wrench or socket.
How often should you change the oil in your Kia vehicle?
Due to improvements in vehicle technology and performance and the use of high-performance synthetic oils, the new standard is every 6 months or 7,500 miles. Kia vehicles, as mentioned above, can even be extended to 10,000 miles between oil changes.
How big is the oil drain bolt on a Kia Sedona?
Tighten the oil drain bolt with the 17mm socket and a 3/8″ drive ratchet to just past hand tight. If you have a torque wrench, the service manual specifies that the oil drain bolt torque specification is 26 to 33 lb-ft (35-45 Nm).
The tools needed to complete this oil change procedure include a 17mm socket with a 3/8″ drive ratchet, a 27mm socket with a 1″ drive ratchet, a floor jack, two jack stands, a used oil catch container, an automotive funnel and 6.02 U.S. quarts of new SAE 5W-30 oil.
The engine cover is held in place by four rubber friction fasteners attached to metal pegs on the top of the engine. Locate the round black plastic oil filter cap at the right (driver) side of the engine. To remove the oil filter cap, you’ll need either a 27mm or a 1 1/16″ wrench or socket.
Due to improvements in vehicle technology and performance and the use of high-performance synthetic oils, the new standard is every 6 months or 7,500 miles. Kia vehicles, as mentioned above, can even be extended to 10,000 miles between oil changes.
Tighten the oil drain bolt with the 17mm socket and a 3/8″ drive ratchet to just past hand tight. If you have a torque wrench, the service manual specifies that the oil drain bolt torque specification is 26 to 33 lb-ft (35-45 Nm).