How much Torque does a Lancer 2008 have?

How much Torque does a Lancer 2008 have?

The entire 2008 Mitsubishi Lancer is powered by an all-new 2.0-litre dual overhead cam MIVEC four-cylinder engine producing 113kW of power (6000 rpm) and 198 Nm of torque ( 4250 rpm).

Is a 2008 Lancer GTS AWD?

The massive rear wing, alloy wheels, and aggressive snout on the new Lancer will be familiar to fans of the World Rally Championship (or fans of a few video games) as cues from the Lancer Evolution series of all-wheel-drive, rally-inspired road cars.

What’s the top speed of a 2008 Mitsubishi Lancer?

(For California, Lancer is PZEV-certified and offers 143 horsepower at 6,000 rpm and 143 lb.-ft. of peak torque at 4,250 rpm.) The 2008 Mitsubishi Lancer is available in three levels of trim and driving dynamics: DE, ES and the sport-tuned GTS.

What are the torque specifications of a Mitsubishi Lancer?

EVO – REAR Body Pivot Shaft Bolts Type: Bolt 47 564 63.72 EVO – REAR Pivot Bolt to Cross Member Type: Bolt 60 720 81.35 EVO – REAR Upper Ball Joint to Rear Knuckle Nut Type: 65 780 88.13 Type: Bolt 37 444 50.17 EVO – FRONT Cross Member Bars to Cross Member Type: 33 396 44.74 EVO – FRONT Shock Absorber to Body Nuts Type: 33 396 44.74

What are the specs of a Lancer Evolution 1?

Lancer Evolution 1 Specs: Engine: 1997cc Power: 250PS @ 6000rpm Torque: 228lbs/ft @ 3000rpm

Which is the Best Repair Manual for a Mitsubishi Lancer?

Our most popular manual is the Mitsubishi – Lancer – Owners Manual – 2011 – 2011 . This (like all of our manuals) is available to download for free in PDF format. How to download a Mitsubishi Lancer Repair Manual (for any year)

What kind of engine does a Mitsubishi Lancer have?

The new-generation Lancer’s standard new 2.0-liter DOHC MIVEC 4-cylinder engine is among the most powerful standard engines in its segment, with 152 hp at 6,000 rpm (Federal Tier 2, Bin 5 emissions) and 146 lb.-ft. of peak torque at 4,250 rpm.

When was the last Mitsubishi Lancer Evolution X made?

The production of the 4B11T was stopped in 2017 with the last Mitsubishi Lancer Evolution X. The 4B11 engine is noisy. This noise increases during warm-up (knocking like a diesel engine) and a little subsides when the engine is warm enough. The common problem for engines until 2009 is a stretched timing chain.

What kind of tires does a Mitsubishi Lancer GTs have?

The 2008 Lancer GTS – with the standard 5-speed manual transmission or the optional CVT – combines a sport-tuned suspension – including different stabilizer bars and spring/shock damping rates – with 18-inch wheels and 215/45 R18 tires to make this model an aggressive twisty-road tamer.

What are the dimensions of a Mitsubishi engine?

The bore and stroke of the engine both measure 86 mm (3.39 in), which engineers refer to as square. According to Mitsubishi, the new cylinder dimensions contribute to a free-revving character (max power at 6500 rpm), linear power delivery and wide torque curve.

How much torque does a Lancer 2008 have?

How much torque does a Lancer 2008 have?

The entire 2008 Mitsubishi Lancer is powered by an all-new 2.0-litre dual overhead cam MIVEC four-cylinder engine producing 113kW of power (6000 rpm) and 198 Nm of torque ( 4250 rpm).

How do I connect my phone to my 2011 Mitsubishi Lancer?

To pair a Bluetooth® device with the Bluetooth® interface.

  1. Stop the vehicle and put the gear selector in the “P” (Park) position.
  2. Press the SPEECH button (on steering wheel, headliner or dashboard).
  3. Say “Setup” .
  4. Say “Pairing Options”.
  5. Say “Pair”
  6. Say a 4-digit number.

What kind of power does a Mitsubishi Lancer have?

The peak 253 pounds-feet of torque comes at 3,000 rpm, but my experience reflects Mitsubishi’s power curves, which show a solid 250 pounds-feet from 2,500 to 4,700 rpm. Even though the power is modest up to 2,500 rpm, the transmission’s lower-gear ratios keep the Ralliart from being too sluggish from a standing start.

Is there a recall on a 2010 Mitsubishi Lancer?

The contact owns a 2010 Mitsubishi Lancer. The contact received a notification for NHTSA campaign id number: 14V562000 (engine) and stated that the part needed was unavailable to perform the recall repair. The manufacturer was notified of the issue. The contact had not experience a failure.

What causes a Mitsubishi Lancer to fail emissions?

2010 Mitsubishi Lancer. Consumer writes in regards to vehicle fails emissions due to service engine warning light indicates catalytic converter/sensor circuit slow response malfunction also passenger windows and key fob battery problems. The consumer stated the dealer advised that the 02 sensors and the catalytic converter needed to be replaced.

What was the name of the Subaru Lancer?

The Lancer was Bobby, but there was no Peter. Subaru had its Cindy and Jan, but Marsha was nowhere to be seen. Then, in 2004, Subaru came out with a Marsha — the WRX STi — that was good enough to be the Evolution’s arch-nemesis. Mitsubishi countered with a Lancer Ralliart that was at best a pre-pubescent Peter Brady.

How much horsepower does a Mitsubishi Lancer have?

Car A Rac presents official data of hp and KW. Standard engine output of Mitsubishi Lancer. Find out what is your car motor power. Car A Rac presents official data of hp and KW.

What kind of timing belt does a Lancer have?

All the 2003 Mitsubishi Lancer engines have a timing belt. The 2.0L is an interference engine and the 2.4L is a non-interference engine. Note:Engines have balance shaft belts as well 2002 Mitsubishi Lancer – Timing Belt Or Chain

What do I need for an oil change on a Mitsubishi Lancer?

The items needed to complete this procedure include a floor jack, two jack stands, a 10mm socket with a 1/4″ drive ratchet, a 17mm socket with a 3/8″ drive ratchet or a 17mm wrench, a used oil catch container, a new oil filter and 5 U.S. quarts of new SAE 0W-20 oil.

Is the Dodge Lancer related to the Mitsubishi Lancer?

Not to be confused with Dodge Lancer. The Mitsubishi Lancer is a compact car produced by the Japanese manufacturer Mitsubishi since 1973.