How much play should be in your clutch lever?
A correctly adjusted clutch cable should have about 1/8” of free play measured at the pivot. When we have too much free play at the lever, the clutch is never fully engaged when we pull the clutch lever.
What causes a stiff clutch pedal?
Sticking or binding in the system: If there is sticking or binding occurring in the pedal linkage, pivot ball, cable or cross shaft, this can cause your clutch to feel stiff when pressure is applied.
How do you adjust clutch?
Step 1 Locate the end of the clutch cable on the transmission. Loosen the cable nut. Pull the cable end through the adjuster hole with pliers while keeping the wrench on the adjuster nut on the linkage. Test your work by engaging and disengaging the clutch with the engine on.
Do you need a clutch adjustment?
Newer vehicles use a hydraulic clutch and slave cylinder that are self adjusting and do not require adjustments . Older vehicles use a clutch cable and clutch lever that require adjustments at regular service intervals to keep the clutch wearing evenly and in good working condition.
How do you adjust clutch cable?
Twist the cable adjuster clockwise with a 10-mm wrench to tighten the cable and reduce the cable’s free play. Twist the adjuster counterclockwise with a 10-mm wrench to loosen the cable and increase free play. Adjust the cable’s tension until there is only 1/8 inch of free play at the clutch lever.
What is the correct clutch pedal adjustment?
Most newer vehicles with manual transmissions have self-adjusting clutches that require no adjustment, but if you have an older model without self-adjustment, you can cut down on the wear on your clutch disk by keeping your clutch pedal properly adjusted. Your clutch pedal should move down 3/4 inch to 1 inch without effort and then require a good deal more effort to travel the rest of the way down to the floor.