How much does it cost to repair a p0014 Hyundai?
The cost of diagnosing the P0014 HYUNDAI code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour. P0014 HYUNDAI Possible Symptoms Engine Light ON (or Service Engine Soon Warning Light) Lack/Loss of power
What does trouble code p0014 mean on a car?
The camshaft (s) is (are) adjusted by the ECM through the use of an oil control valve (s) (OCV) also called variable valve timing control solenoid valves. When trouble code P0014 is set, it means that the exhaust camshaft in Bank 1 is more advanced than the ECM has told it to be.
What are the symptoms of Hyundai Sonata p0014?
Typically, P0014 will cause quite a few noticeable symptoms in the Hyundai Sonata. They include (but are not limited to): Difficulty Starting – Like any vehicle with ignition timing that is too far advanced, it can be really difficult to start a vehicle with P0014, particularly when the engine is at normal operating temperature.
What causes dirty oil in a Hyundai p0014?
P0014 HYUNDAI Possible Causes Dirty Oil Low engine oil level Faulty Valve Timing Control (VTC) Valve Timing Control (VTC) harness is open or shorted circuit. Valve Timing Control (VTC) circuit poor electrical connector Incorrect timing
What does p0014 mean on a Hyundai Santa Fe?
This includes the Hyundai Santa Fe. VVT adjusts the camshafts position at different RPM’s and engine loads to maximize the operating efficiency of the motor. P0014 means that the camshaft position is too far advanced from where it should be in relation to normal operating specs. Below, you’ll find some typical issues that cause P0014.
What is the trouble code for Hyundai Santa Fe?
P0014 is a relatively common trouble code for vehicles that have Variable Valve Timing (VVT). This includes the Hyundai Santa Fe. VVT adjusts the camshafts position at different RPM’s and engine loads to maximize the operating efficiency of the motor.
What does it mean when code p0014 is set?
The camshaft (s) is (are) adjusted by the ECM through the use of an oil control valve (s) (OCV) also called variable valve timing control solenoid valves. When trouble code P0014 is set, it means that the exhaust camshaft in Bank 1 is more advanced than the ECM has told it to be. What Are The Symptoms Of Code P0014? What Is The Cause Of Code P0014?