How long does it take to change the battery in a Harley Davidson Softail?
Changing the battery in a Harley-Davidson Softail is a relatively simple matter of removing the seat and disconnecting the battery terminals. It should take no more than 30 to 45 minutes to complete the process.
How do you replace a battery on a Harley Davidson?
If you have a battery box, you’ll need to unhook the battery strap from the right side of the battery. Depending on your year model, your cables may use Phillips head screws or small bolts that require a 8mm or 10mm socket. Loosen the screws/bolts by turning them counterclockwise.
Where are the mounting nuts on a Harley Davidson Softail?
There are many seat options available for the Softail, but most are removed similarly. Locate the mounting nuts or bolt (s) around and under the seat. Remove them and gently lift the seat up. Look under the seat with a flashlight to identify any remaining mounting bolts.
Where is the seat fastener on a Harley Softail?
Unscrew the seat fastener located on the top of the rear fender with a Phillips-tip screwdriver. Loosen and remove the two large bolts located on the lower left and right undersides of the seat with a large SAE hex wrench. Slide the seat toward the rear of the bike while lifting it up and away.
How do you change the battery on a Softail?
If your Softail uses a battery box, remove the cover by removing the screw at the bottom of the cover. Pull outward at the top of the cover to disengage the cover clip. Figure 2. This style of seat will have nuts behind the seat. Figure 3.
Where is the battery located on a Harley Davidson Softail?
The battery chart. Your battery is mounted below/beside your seat. You’ll need to remove your seat and/or battery box access cover to gain access. There are many seat options available for the Softail, but most are removed similarly. Locate the mounting nuts or bolt (s) around and under the seat.
How long does it take to change a battery on a Harley?
Changing the battery in a Harley-Davidson Softail is a relatively simple matter of removing the seat and disconnecting the battery terminals. It should take no more than 30 to 45 minutes to complete the process. Turn off the ignition.
There are many seat options available for the Softail, but most are removed similarly. Locate the mounting nuts or bolt (s) around and under the seat. Remove them and gently lift the seat up. Look under the seat with a flashlight to identify any remaining mounting bolts.