How does a Sym moped limit its speed?
Your Sym moped’s speed is restricted by a washer on the front pulley wheel of the moped’s variator system. The washer restricts your Sym’s speed by limiting contact between the variator belt and the front pulley. Remove your Sym’s kickstart from the side of the moped’s variator case.
What does it mean to derestrict a 50cc moped?
Let’s start with a simple definition. Derestricting refers to the idea of eliminating and/or purposely removing restrictions on anything that’s restricted. In this case, the 50cc moped comes with a set of restrictions due to CARB regulations in the US.
Can a washer be removed from a Sym moped?
Removing this washer derestricts your Sym moped, allowing the belt to contact the front pulley and permitting your moped to travel faster. In order to remove the washer, you will need some mechanical know-how as well as a few basic tools.
What happens when you derestrict a scooter engine?
Derestricting the scooter will increase performance considerably allowing for a much faster acceleration and also a higher top speed (usually about 75km/h). Fuel consumption usually increases but in some cases can be lower or remains the same. The most common scooter engine restrictions
Is it possible to derestrict a 50cc Scooter?
Removing this washer will derestrict the speed, allow your scooter to accelerate quicker and travel faster. Accessing the washer requires several basic hand tools and a rudimentary understanding of how to disassemble your scooter’s variator system.
How do I derestrict my Sym symply 50?
I had my Sym Symply derestricted at my local Sym dealer, but it will only go about 37-40mph max speed, 20-25mph on any kind of incline, plus acceleration is virtually the same as when it was restricted. Is this normal?? I was able to get it up to 37 MPH by removing the spacer under the transmision cover.
Your Sym moped’s speed is restricted by a washer on the front pulley wheel of the moped’s variator system. The washer restricts your Sym’s speed by limiting contact between the variator belt and the front pulley.
How do you remove the Kickstart on a 50cc Scooter?
Detach the kickstart from the variator system. It is attached to the system by a pin that is tightened into place with a small bolt. Loosen the bolt and pull the pin and you can remove the kickstart from the scooter. Open up the variator system. In some 50CC scooters, this will require you to first remove the intake case.