How do you use a blue parrot XT 550?

How do you use a blue parrot XT 550?

Press and hold the Multi-function button until you hear “Power On”, followed by “Discovering” announced in the headset. The LED will alternate red and blue. Your headset will be visible for pairing to devices for 120 seconds. Turn on Bluetooth on your smartphone and then select your headset from the list.

How do I setup my BlueParrott b550 XT?

Using Buttons: With the headset powered off, press the MFB until the light rapidly flashes blue and you hear the audio prompt “power on .” Keep holding the MFB for approximately 10 seconds until you hear “Pair Mode .” The headset will be visible for pairing to devices for 120 seconds .

How do I reset my BlueParrott b550 XT?

Hold the headset near your ear and press and hold the Parrott Button and the Volume Down buttons together for approximately 6-10 seconds until you see two quick purple flashes on the MFB . 3 . The headset Parrott Button is reset and the pairing memory is now clear .

How do I connect my 550 blue parrot?

How do I pair my BlueParrott headset with my smartphone?

1. Turn your headset on.
2. Press and hold the Multi-function button until you hear “Pair Mode” announced in the headset and the light alternates blue and red.
3. Turn on Bluetooth on your smartphone and then select your headset from the list.

Does Blue Parrot work with iPhone?

Make your iPhone or Android smartphone even smarter with the BlueParrott App. You can also have your texts read aloud* through your headset, program your BlueParrott Button™ to a range of functions, get instant access to technical support and your headset user manual.

What does the Blue Parrot button do?

Allows you to launch an application of your choice from your headset simply by pressing the BlueParrott Button on your headset. This easy access makes your favorite application that much easier to access when you are on the go. Note: When on an active call, the BlueParrott Button will function as mute.

Can you listen to music on a BlueParrott B250 XT?

Your BlueParrott B250-XT headset does not support the Advanced Audio Distribution Profile (A2DP), which enables multimedia audio communication, such as music, between your headset and a connected Bluetooth device.

How do I put my BlueParrott B250 XT in pairing mode?

Pairing to a Cell Phone Put your cell phone in Bluetooth Search/Scan Mode per the manufacturer’s instructions . Select “BlueParrott B250-XT USB” to pair . (Passcode is “0000” if needed .) When connected, you will hear a single tone and the indicator light will be flashing blue .

How do I connect my blue parrot to my iPhone?

Prerequisites

1. Turn your headset on.
2. Press and hold the Multi-function button until you hear “Pair Mode” announced in the headset and the light flashes blue. Your headset will be visible for pairing to devices for 120 seconds.
3. Turn on Bluetooth on your smartphone and then select your headset from the list.

How do I connect my blue parrot B450 to my iPhone?

Pair using voice commands Press the BlueParrott Button™ or press and hold the Volume Up button. After the voice prompt, say “pair mode”. The headset is now in pairing mode. Go to the Bluetooth menu on your smartphone and select the BlueParrott B450-XT from the list of available devices.

What is the ignition system on a XT 550?

The 550 ignition system, being CDI and not TCI, is very simple. You don’t need the reg/erct, battery, lighting circuit, etc. All you have is the generator, cdi, coil, plug, ignition switch and kill switch, the rest is entirely separate. Forget the battery circuit for the moment, it’s utterly irrelevant.

What kind of CDI do I need for my XT 550?

You can use a non-yam CDI to check, the easiest one to use is a C50/70/90 CDI (and has the benefit of being cheap as chips). This has no advance, so you connect to either the white/red or white/green pulser and the green, plus the red and brown.

What should the fuel level be on a Yamaha XT 550?

The fuel level should be within spec 5 – 8mm (check against manual for that figure tho) If you are still having problems, you’ll need to strip the carb further. 5. Check and clean all jets and atomisers. DONT forget the mini guaze filter that sits in front of the needle and seat either. 6.

What kind of ignition system does a Yamaha 550 have?

The 550 ignition system, being CDI and not TCI, is very simple. You don’t need the reg/erct, battery, lighting circuit, etc. All you have is the generator, cdi, coil, plug, ignition switch and kill switch, the rest is entirely separate.