How do you set up a key fob for a Pontiac G6?
How to Program a GM G6 for Keyless Entry
- Enter your car, close all of the doors behind you and press and hold the “Unlock” switch on the driver’s door.
- Insert and remove your key from the ignition twice and then insert the key in the ignition a third time.
How to program the keyless entry on a Pontiac G6?
Put your key in the ignition and hold the “Lock” button on the driver’s car door. Turn the G6 key in your ignition from “On” to “Off” while holding the “Lock” button, and do two more cycles of “On” and “Off” in quick succession. Release the “Lock” switch on your door and press and hold the “Lock” button on your keyless remote for 10 to 15 seconds.
How do you lock your door on a G6?
Release the “Lock” switch on your door and press and hold the “Lock” button on your keyless remote for 10 to 15 seconds. Remove the key from the ignition of your G6, and test the programming. Matthew Fortuna is a full-time freelance writer with a journalism degree from Wayne State University, living in the Detroit metropolitan area.
How to do remote programming on a Pontiac G5?
ENTER the vehicle and CLOSE the Driver’s door. INSERT working Transponder Key into Ignition and TURN to the ‘ON’ position (just prior to cranking engine), WAIT 1 second and TURN back to the OFF position to successfully enter Programming Mode. REMOVE key from Ignition.
Are there any free keyless entry instructions for Chevy Silverado?
We strive to provide convenience to our customers with free keyless entry remote fob programming instructions for every single vehicle that we sell on NorthCoast Keyless.
How to change the ignition key on a Pontiac G6?
INSERT NEW key into Ignition and TURN to the ‘ON’ position (just prior to cranking engine). The key is now programmed to your vehicle. TEST the new Transponder Key.
How do you program a GM G6 keyless entry?
Release the “Unlock” tab on the door and wait for the car to emit a chiming sound. Press and hold the “Lock” and “Unlock” buttons on your remote for up to 30 seconds, until you hear another chime. This will indicate successful programming and you can remove the key from your ignition.
Where is the reset button on a GM remote?
The Set/Reset button should be near the Vehicle Information button. If you cycle past the option, continue pressing the Set/Reset button until the “Remote Key Learning Active” option reappears. Press and hold the Lock and Unlock buttons at the same time. Do this for at least fifteen seconds.
How do I relearn my GM keyless remote?
Put your key in the ignition and turn it all the way clockwise until you hear the engine come on. Make sure that the gear shift is set to park. Press and hold the Vehicle Information button until the display reads “Press V to Relearn Remote Key. ” If for some reason the display does not appear, restart your car, and repeat the previous steps.