How do you set the valves on a Kawasaki Bayou 300?
However, proper valve clearance is maintained through the use of threaded adjusters built into the rocker arms. Park the ATV on a level surface surface and apply the parking brake. Let the engine cool for at least two hours. Remove the seat using the release lever under the left side of the seat.
What should the air gap be on a Kawasaki Bayou 300?
Ideally, there should be a 0.003- to 0.005-inch air gap between the valve stem and the rocker arm. Additionally, the feeler gauge should be able to move between the valve and the rocker arm with a slight drag. Loosen the adjuster locknut on the top of the rocker arm using an 8 mm box-end wrench.
How do you remove gas cap from Kawasaki Bayou 300?
Remove the screws attaching the sides of the front fender to the foot well panels using a Phillips-head screwdriver. Remove the front fender mounting bolts using a 10 mm socket and a Phillips-head screwdriver. Unscrew the gas cap, then lift the front fender off the ATV. Screw the gasp cap onto the fuel tank.
Where is the feeler gauge on a Bayou 300?
Slip a feeler gauge between the intake valve stem, located at the top of the valve, and the rocker arm. Ideally, there should be a 0.003- to 0.005-inch air gap between the valve stem and the rocker arm. Additionally, the feeler gauge should be able to move between the valve and the rocker arm with a slight drag.
Where is the clutch adjuster on a Kawasaki Bayou 300?
Go to Kawasaki.com and follow the links to the parts diagrams for the clutch. Look for part number 92009, that is the clutch release adjuster. I would suspect the clutch plate frictions are due for replacement based on the age of the machine. Thanks RCW. I looked at the diagram a million times before, but I just noticed the adjuster.
How often should I Reset my Bayou 300?
Bayou 300 2×4 or 4×4 valve settings. Most people reset the valves at least once a year. Hours are not a good indicator by which to reset the valves, as when they set around for extended periods the valve seats and faces tend to corrode and then when used they clear the corrosion and the valves need adjustment.
What kind of oil do you put in a Bayou 300?
I recently acquired (CHEAP!) a ’95 bayou 300 4×4. Ive noticed a little slippage in 3rd and 4th gears. I accidentally addded 1/4 qt. of regular oil to the oil that was in it before I realized it needed Jaso-spec oil for wet clutch.