How do you reset the service reminder light?
While the (_ _ _ _ km) is displayed. Press and hold the TRIP BUTTON until the spanner light is flashing, then release the trip button. Then press again the Trip button to display CLEAR. The service reminder light is now reset. Start the engine. to verify the service maintenance light has been reset.
How to reset service wrench icon Light Smart Car ForTwo?
Press the left side TRIP button on the left side of the speedometer twice within the first 4 seconds. Switch off the ignition within 10 seconds. Press and hold the TRIP button again and switch the ignition to ON position. Continue to hold button until service indicator flashes and jumps back to “0”.
How to reset service due icon light on Mini Countryman?
Press the BC button (located on the turn signal switch) to scroll through the service options Stop at the service that needs to be reset, then press and hold the BC button until “Reset” appears in the lower display Pressing the button again resets the service shown in the upper display
How do I Turn Off the service wrench light?
Press the “SELECT” button repeatedly to scroll through the interval settings. This will allow you to adjust the amount of engine operation hours before triggering the service wrench Icon. You may elect to turn the service feature off completely by selecting “OFF” in the menu.
1. Turn ignition to position I. 2. Press and hold in the reset button for the trip odometer. 3. Turn ignition to position II, while continuing to press trip odometer reset button. 4. The service reminder indicator (SRI) starts flashing when the reset button for the trip odometer has been pressed for 10 seconds.
Do you need to reset service reminder on Volvo S60?
Please try again later. After changing oil and filters in your Volvo S60, V70, XC70, S80 or XC90 you can reset service reminder yourself. You don’t need diagnostic interface or expensive computer to do so. All you need to do is perform reset procedure and your Volvos maintenance reminder will be cleared.
How do you reset the service light on a Volvo?
Reset is performed using a Volvo scan tool, or equivalent aftermarket scan tool. Connect scan tool to Data Link Connector (DLC) in center console, in front of shift lever. See Fig. 8. Turn ignition on, with engine off. Follow scan tool menus as follows:
How do you reset the trip meter on a Volvo S60?
Step 1. Confirm that you have the trip computer in T-1 mode; Step 2. Put the car key, and turn the ignition to position I ; Step 3. Press and hold trip meter reset button until the trip meter reads “0.0”. Do not release trip meter reset button; Step 4.