How do you reset the service light on a Volvo loader?
How to Reset Volvo Service Light
- Turn key to position I.
- Press the reset button on the center of the instrument cluster (T1/T2) and keep it pressed.
- Turn key to Position II as you continue to hold the reset button pressed.
- Continue holding the reset button until you see the service reminder light start blinking.
How do you reset the service light on a 2008 Volvo XC70?
XC70 2008-2005 Service Light Reset
- Turn ignition switch to position I.
- Press and hold the trip odometer reset button.
- Turn ignition switch to position II, while continuing to press trip odometer reset button.
- Wait for 10 seconds.
- Release the reset button when the information lamp starts to flash.
How do you reset the service light on a Volvo?
Reset is performed using a Volvo scan tool, or equivalent aftermarket scan tool. Connect scan tool to Data Link Connector (DLC) in center console, in front of shift lever. See Fig. 8. Turn ignition on, with engine off. Follow scan tool menus as follows:
When does the service reminder light go out on a Volvo?
The Service Reminder Indicator (SRI) is triggered at the appropriate interval is reached. On US and Canadian cars, with or without turbocharger, this will be 10,000 miles (15,000 km), 750 operating hours or 12 calendar months. Once triggered, the SRI comes on each time the engine is started. The light goes out after about 2 minutes.
Where is reset button on service reminder light?
Only vehicles listed in this index have a Service Reminder Light reset. To reset counter, locate reset lever behind instrument cluster and push reset lever upward. See Fig. 3. To reset counter, locate button behind right center of instrument cluster and press button. See Fig. 4. Remove rubber grommet to left of odometer.
What’s the Sri reset procedure for a Volvo?
SRI reset may depend on instrument panel installed in vehicle. See Procedure 5 (1996-97 850 With VDO Instrument Clusters) or Procedure 6 (1993-97 850 With Yazaki Instrument Clusters).