How do you reset the service indicator on a smart car?
Select maintenance indicator (so it’s in the display) within the first 4 seconds. 3. Switch off the ignition within the display period of 10 seconds. (Maintenance should remain in the display). 4. Push the service button (button on the left of the cluster) and hold it while you switch the ignition on. 5.
How to reset the BMW service light you service indicator?
Dashboard warning lights will turn on when a vehicle issue is detected, regardless of the number of miles or time since the last service. The basic steps are similar to resetting the BMW service light, with a small difference: Follow steps 1 through 3 from the instructions above. Release the odometer button after the service message comes on.
How to reset oil service / service indicator on a seat?
STEP 1: press the button from the cluster and keep pressing until… STEP 2: …until you put the key in the second position (don’t start the engine!)
How to reset the service Minder light on a Mercedes?
The service minder information display must be reset after performed the maintenance service on your vehicle. Follow the instructions below to reset the Service Minder light on your Mercedes-Benz CLK-Class: If your vehicle has an ignition button, press the ENGINE START STOP button twice without touching the brake pedal Done!
How do I reset the service indicator on my Mercedes Benz?
Press the reset button for trip counter and keep it pressed. Move the start switch into position “2”. Continue to hold the reset button for the trip counter pressed until the signal sounds and the new start distance appears in the display (it takes about 10 seconds). Click to expand…
Dashboard warning lights will turn on when a vehicle issue is detected, regardless of the number of miles or time since the last service. The basic steps are similar to resetting the BMW service light, with a small difference: Follow steps 1 through 3 from the instructions above. Release the odometer button after the service message comes on.
How do you reset the service indicator on a Honda Accord?
Scroll to “Full Service.” Press the scroll forward button until “Conf. Full Serv.” is highlighted. Confirm the selection, and reset the service indicator by pressing the “OK” button. Once the service indicator is reset, place the ignition back to position “0.” Figure 6. Confirm full service and reset the indicator.
Why does the service indicator come on on my Mercedes W212?
This article applies to the Mercedes-Benz E-Class w212 (2009-Present). The service indicator in your w212 always comes on to remind you of an upcoming oil change. While this is a great maintenance feature, it can also be frustrating if the light stays on after your oil has been changed.