How do you reset the oil light on a 2012 Kia Forte?

How do you reset the oil light on a 2012 Kia Forte?

Insert key into ignition without starting the engine. Use the menu button located on the right side of the steering wheel to scroll down to RESET, Press OK. You will see “Reset to factory default”. Press YES then OK.

How often should you change the oil in a 2012 Kia Forte?

every 3,000-5,000 miles
Kia recommends getting your 2012 Kia Forte oil & filter changed every 3,000-5,000 miles for conventional oil.

How do you reset the service light on a Kia Forte?

KIA FORTE 2019-2021 SERVICE REQUIRED RESET

  1. Close all doors, put the gear to the park position.
  2. Turn the ignition on.
  3. Press the PAGE button to navigate USER SETTINGS.
  4. Then scroll down to SERVICE INTERVAL and press the OK button.
  5. Scroll down to RESET then press the OK button.
  6. RESET THE TIME AND DISTANCE?

What oil does a 2012 Kia Forte use?

SAE 5W-20
Engine Oil For better fuel economy , it is recommended to use SAE 5W-20. Capacity: 4.5 quarts (with filter)After refill check oil level.

How do you reset the service interval on a 2021 Kia Forte?

What does service required mean on a Kia Forte?

If you do not have your vehicle serviced according to the already inputted service interval, “Service required” message is displayed for several seconds each time you set the ignition switch or Engine Start/Stop Button to the ON position (The mileage and time changes to “—“).

What to do when Kia Forte warning light comes on?

Turn off the engine and check the oil level. If the oil level is low, fill the engine oil to the proper level. Start the engine again. If the warning light stays on after the engine is started, turn the engine off immediately. In this case, have your vehicle inspected by an authorized Kia dealer. When the fuel tank is nearly empty.

What should I do if my Kia indicator light goes off?

When there is a malfunction with the emission control system. In this case, have your vehicle inspected by an authorized Kia dealer. If the Malfunction Indicator Lamp (MIL) illuminates, potential catalytic converter damage is possible which could result in loss of engine power.

How does the ecominder indicator work on Kia Forte?

When you deactivate the ESC system by pressing the ESC OFF button When the Active ECO button is pressed the ECOMINDER® indicator (green) will illuminate to show that the Active ECO is operating. When the vehicle detects the immobilizer in your key properly while the ignition switch is ON.

Can a low tire pressure cause a Kia to overheat?

In this case, have your vehicle inspected by an authorized Kia dealer as soon as possible. Significantly low tire pressure makes the vehicle unstable and can contribute to loss of vehicle control and increased braking distances. Continued driving or low pressure tires will cause the tires to overheat and fail.

Turn off the engine and check the oil level. If the oil level is low, fill the engine oil to the proper level. Start the engine again. If the warning light stays on after the engine is started, turn the engine off immediately. In this case, have your vehicle inspected by an authorized Kia dealer. When the fuel tank is nearly empty.

What kind of car is the Kia Forte?

The Kia Forte, known as the K3 in South Korea, the Forte K3 or Shuma in China and Cerato Vivaro in Colombia, is a compact car produced by Kia Motors since mid-2008. It replaced the Kia Cerato/Spectra and is available in two-door coupe, four-door sedan, five-door hatchback variants.

When there is a malfunction with the emission control system. In this case, have your vehicle inspected by an authorized Kia dealer. If the Malfunction Indicator Lamp (MIL) illuminates, potential catalytic converter damage is possible which could result in loss of engine power.

When you deactivate the ESC system by pressing the ESC OFF button When the Active ECO button is pressed the ECOMINDER® indicator (green) will illuminate to show that the Active ECO is operating. When the vehicle detects the immobilizer in your key properly while the ignition switch is ON.