How do you replace a fork steering lock?
The part at 12 O’clock is the assembly that holds the tumblers. The idea is to drill a hole into the lock and cut the head of the screw off from underneath. It sounds hard, but is actually quite easy. Use a sharp center punch to make a dent in the lock at midway between 2 and 3 O’clock. I use a center punch to mark the place for the hole.
What should I do if my steering wheel is locked?
If your steering wheel is locked, then one of those two directions will be very solid and one direction will be a little springy (wheel wants to spring back). Determine what direction you need to turn the wheel so you can feel it wanting to spring back, then go to step 2.
What kind of steering lock do I Need?
The steering lock, on the left, is an old one showing the flats. The steering stem, on the right, is a /5 stem with the slot milled into the stem. It is one of the luxury versions with the sides of the slot beveled off to assist in lock insertion.
Can you replace the Fork Lock on a Harley Davidson?
If you ever lose the key to your Harley Davidson or purchase a used Harley without keys, you will need to replace your ignition switch and fork lock assemblies. These assemblies are, typically, keyed to match. That is, you should be able to use the same key for both ignition switch and the Harley fork lock.
How do you take steering lock off Harley Davidson?
Trust me. Turn the lock to the accy. position, insert the key and turn it counter-clockwise past the unlock position until it stops, reach under the lock and depress the disconnect button with a finger and pull the lock straight up and out.
The part at 12 O’clock is the assembly that holds the tumblers. The idea is to drill a hole into the lock and cut the head of the screw off from underneath. It sounds hard, but is actually quite easy. Use a sharp center punch to make a dent in the lock at midway between 2 and 3 O’clock. I use a center punch to mark the place for the hole.
If your steering wheel is locked, then one of those two directions will be very solid and one direction will be a little springy (wheel wants to spring back). Determine what direction you need to turn the wheel so you can feel it wanting to spring back, then go to step 2.
How to replace a steering cable lock on a Sea Doo?
If your steering cable lock brakes, you’ll lose steering control and take on water. In this how-to instalment we show you how to replace this critical but often overlooked steering component. Suggested Part: Steering cable lock nut (277 001 729; or http://www.amazon.com/gp/product/B00K…)