How do you remove throttle controller?
Part 1 of 2: Removing the throttle controller
- Materials Needed.
- Step 1: Locate the throttle controller.
- Step 2: Disconnect the negative battery cable.
- Step 3: Remove the air intake tube.
- Step 4: Remove the throttle controller electrical connector(s).
- Step 5: Remove the throttle body bolts.
Where is the intake valve on a scooter?
In order to access the intake valve on your scooter you will need to gain access to the engine. Removing the seat and the plastic housing which lies beneath the seat. Remove the the intake valve cover (Flat metallic box underneath the intake hose).
Why does my Baja 150 gygscooter cut out?
On the front right side of my Peace Sport “bash” 150, a small canister is producing air (exiting) and it seems that a hose should be connected to it, but … Why does my Baja 150 gygscooter cut out?
What to do if your motor scooter won’t idle?
If you find the intake valve is too loose, twist it by hand in a clockwise direction until you reach the desired clearance level. Once you are happy you can just about slide a .004 feeler gauge behind your intake valve then you can re-tighten the intake valve nut and reassemble the intake valve cover and the rest of your scooter.
Do you know how to take care of a scooter?
No matter what scooter questions you have, we’ll try to help… When you depend on a motorized vehicle for transportation, recreation or anything else, knowing how to take care of it – and when – is essential. That is no different when your vehicle is a scooter. Some scooters need more TLC than others; just ask most Chinese scooter lovers!
In order to access the intake valve on your scooter you will need to gain access to the engine. Removing the seat and the plastic housing which lies beneath the seat. Remove the the intake valve cover (Flat metallic box underneath the intake hose).
If you find the intake valve is too loose, twist it by hand in a clockwise direction until you reach the desired clearance level. Once you are happy you can just about slide a .004 feeler gauge behind your intake valve then you can re-tighten the intake valve nut and reassemble the intake valve cover and the rest of your scooter.
Where is the valve on a 150cc carburetor?
Most 125cc – 150cc GY6 carburetors have a valve immediately next to the drain tube that can be opened with a flat-blade screwdriver. Other setups have the valve at the tip of the drain tube. If your carburetor is aftermarket came from a lower-price source, you might not have a valve or tube at all.
What can I use to fix my motor scooter?
USE A CARBURETOR CLEANER – these products are specially designed to remove small, performance damaging pieces of dirt trapped in these jets, spray or soak these pieces with carb cleaner for the best results. Once you have cleaned up these jets, reassemble them back to their original positions.