How do you remove the dash from a Camry?
Pull the upper dash trim off to access the cluster itself. Remove the two screws holding the cluster in place, disconnect the two electrical wire connectors from the rear of the cluster and pull the cluster out of the vehicle. If you are having a difficult time pulling it out, use a slotted screwdriver to slide it out.
How do you remove the instrument cluster from a Camry?
Remove the two securing screws from the upper dash trim around the instrument cluster. Pull the upper dash trim off to access the cluster itself. Remove the two screws holding the cluster in place, disconnect the two electrical wire connectors from the rear of the cluster and pull the cluster out of the vehicle.
Where is the instrument panel on a Toyota Camry?
Disconnect the battery’s negative terminal (black lead). Depress the lever on the side of the steering wheel, and tilt it all the way down. Use a small Phillips screwdriver to remove the two screws holding the instrument cluster trim piece in place. These screws are located on the underside of the dashboard, just above the instrument cluster.
How do you remove the kick panel from a Camry?
Remove the two screws from each kick panel with a Phillips screwdriver and pull them out of the vehicle. Remove the two screws on the far right end of the dashboard with a Phillips screwdriver. Remove the two screws on the far left end of the dashboard as well. Use a slotted screwdriver to pop out all of the vents from the dashboard.
How do you replace the radio in a Toyota Camry?
Remove the head unit trim panel. Using a Phillips screwdriver, remove four mounting screws located on each corner of the radio. The screws mount the radio’s brackets to the center console. Carefully slide the radio out, but do not remove it completely. Figure 2. Remove the four radio mounting screws. Figure 3. Slide the radio out.
Do you need to disassemble a Toyota Camry?
If you own a Toyota Camry and wish to perform repairs or maintenance on devices such as the radio, the instrument cluster or the heater core, you are going to have to disassemble the dashboard. Removing the dashboard mainly requires you to remove screws and pull off the dashboard one panel at a time.