How do you open the hood on a 2004 Honda CRV?
Open the driver’s door of your CR-V and locate the hood release under the dash against the left-hand inner kick panel. Grasp the handle and pull it back until the hood pops open.
How much does it cost to replace a hood on a Honda CRV?
The average cost for a Honda CR-V hood latch replacement is between $150 and $164. Labor costs are estimated between $56 and $71 while parts are priced at $93. This range is based on the number and age of Honda CR-V’s on the road.
How to fix a broken hood latch on a Honda Civic?
This fix is applicable to all models of the Honda Civic from 1996 to 2011, Honda CR-V from 1997 to 2006, Honda Element from 2003 to 2011, and Honda Ridgeline from 2006 to 2014. This is an easy 5 minute job. Part is the PermaFix 900. You can purchase this piece on ebay and Amazon for relatively cheap. Loading…
What happens when the hood release cable breaks on a Honda CRV?
Some you have to go from under some through the grill. We managed to break the button snaps that hold the grill without damaging the grill by prying up the hood about 1/2 inch. resulting in the need to buy a new latch mechanism. this is the bad about these cables when they break.
Where is the release arm on a Honda CRV?
Here’s a couple pictures showing the release arm and latch so you can see where they are located. The release arm (marked B) will release the primary latch. Then you can release the second safety latch like normal. That arm needs to come down .
What to do if your hood release cable breaks?
If it’s loose it either broke at the cable or the end piece. You have to get to the back of the latch and move the release arm. I usually try and get under the vehicle and remove the plastic splash shield from the bottom and get a long screwdriver or something I can fish up from the bottom to that arm to “pop” it open.
This fix is applicable to all models of the Honda Civic from 1996 to 2011, Honda CR-V from 1997 to 2006, Honda Element from 2003 to 2011, and Honda Ridgeline from 2006 to 2014. This is an easy 5 minute job. Part is the PermaFix 900. You can purchase this piece on ebay and Amazon for relatively cheap. Loading…
Some you have to go from under some through the grill. We managed to break the button snaps that hold the grill without damaging the grill by prying up the hood about 1/2 inch. resulting in the need to buy a new latch mechanism. this is the bad about these cables when they break.
Here’s a couple pictures showing the release arm and latch so you can see where they are located. The release arm (marked B) will release the primary latch. Then you can release the second safety latch like normal. That arm needs to come down .
If it’s loose it either broke at the cable or the end piece. You have to get to the back of the latch and move the release arm. I usually try and get under the vehicle and remove the plastic splash shield from the bottom and get a long screwdriver or something I can fish up from the bottom to that arm to “pop” it open.