How do you drain a heater core?

How do you drain a heater core?

Now, here’s how to perform a heater core flush:

1. Step 1: Locate the Heater Core. First thing’s first.
2. Step 2: Disconnect the Heater Hoses.
3. Step 3: Apply the Pressure.
4. Step 4: Hit it with the Hose.
5. Step 5: Reconnect the Heater Hoses.
6. Step 5a: Flush your entire cooling system with Thoro-Flush.
7. Step 6: Refill the Coolant.

Where does a leaking heater core come from?

A leaking heater core usually will cause a much more annoying leak. On most new vehicles, the heater core is inside the cabin of the vehicle.

What should I do if my heater core comes out?

Take care not to damage outlet port or you will have to replace the whole heater core. If the hose is old and caked onto the outlet port, you may have to replace the hose as removing it will likely damage the seal. Liquid will most likely come out as well so have the rags ready to clean up any spilled coolant. Step 3: Attach garden hose to outlet.

Where is the return line on a car heater?

Usually located inside the dashboard on the passenger side, there will be a valve controlled hose that regulates coolant going into the heater core. The other tube is the return line to get the coolant back to the cooling system. For this job, you’ll need a garden hose and running water.

Where does coolant go after going through the heater core?

The outlet hose will typically run straight to the radiator or cooling system reservoir to return the coolant after flowing through the heater core. Tip: If you are having trouble figuring out which is which, when the engine is hot, turn the heat up all the way.

Where does the coolant go after flushing out the heater core?

The inlet hose may have a heater control valve which regulates the amount of coolant flowing into the heater core. The outlet hose will typically run straight to the radiator or cooling system reservoir to return the coolant after flowing through the heater core.

Usually located inside the dashboard on the passenger side, there will be a valve controlled hose that regulates coolant going into the heater core. The other tube is the return line to get the coolant back to the cooling system. For this job, you’ll need a garden hose and running water.

Take care not to damage outlet port or you will have to replace the whole heater core. If the hose is old and caked onto the outlet port, you may have to replace the hose as removing it will likely damage the seal. Liquid will most likely come out as well so have the rags ready to clean up any spilled coolant. Step 3: Attach garden hose to outlet.

Where is the heater core located in a car?

Where Is the Heater Core Located? Your heater core is usually behind your dashboard, under the center or the passenger side. It will have some sort of casing or housing and is usually buried behind almost every other component of the dashboard.