How do you cut a thread in Solidworks?

How do you cut a thread in Solidworks?

Creating a Cut Thread

1. Open a model with a cylindrical part and click Insert > Features > Thread .
2. In the graphics area, select a circular edge.
3. In the PropertyManager, under Specification, set values for the following:
4. For Thread method, click Cut thread.
5. Set the starting position of the Thread Location:

What tools cut external threads?

External threads, such as for bolts and studs, are made by using a tool called a DIE, which is applied to a specific diameter of rod for the size and pitch of the threads you want to cut. Both taps and dies can be used to either cut new threads or repair damaged threads.

How do you call an external thread in a Solidworks drawing?

The thread callout is defined in the Cosmetic Thread feature of the source part or assembly. You use the Smart Dimension tool to add the callout in a side view or section view of the external thread. To add the callout: Click Smart Dimension (Dimensions/Relations toolbar) or Tools > Dimensions > Smart.

What is Dedendum for external thread?

Dedendum for external thread is the radial distance between the pitch cylinder and minor cylinder and this is the radial distance between the major and pitch cylinders for internal thread. It is also known to as the outside diameter or full diameter for external threads. Sometimes it is also called crest diameter.

Where is the thread option in Solidworks?

Using the Thread Tool The Thread Tool can then be found underneath the Hole Wizard Tool on the Features tab of the Command Manager, or in Insert>Features>Thread. Once the Thread Tool is selected the location of the thread needs to be specified by selecting a circular edge. Then the thread specification should be set.

Which of the following tool is used for outside threads *?

Explanation: Threading dies are used to cut external threads on cylindrical work-pieces.

How do you call a thread?

Here are the five steps to interpreting thread callout:

1. Look at the numbers in the callout.
2. Understand the first number in the callout – This indicates the major diameter.
3. Understand the second number in the callout – This indicates the distance between threads.
4. Read the length – This is the number that follows the x.

How to remove threads from a SolidWorks sketch?

In the feature tree, select the previous sketch and the helix Insert / Cut / Sweep…. select OK. (You may end up with multiple bodies after the cut sweep due to rounding errors in SolidWorks. If so, select the threaded body to keep, and delete the remaining thin skin over the threads.) External Thread.

How to set thread in SolidWorks external thread?

Once the Thread Tool is selected the location of the thread needs to be specified by selecting a circular edge. Then the thread specification should be set. For SOLIDWORKS external threads the options such as Metric or Inch Die can be used, whereas options like Metric or Inch Tap are best suited to threaded holes.

How to create a helical thread in SolidWorks?

You can use options in the Thread tool to create helical threads on cylindrical bodies. You need to work carefully as the interaction of these options sometimes causes subtle errors. You can specify the following properties when inserting a thread in a part. Search ‘Thread’ in the SOLIDWORKS Knowledge Base.

How do you keep the thread length constant in SolidWorks?

Click Offset. Click Reverse Direction . Set Offset Distance to 1.00mm. The sketch contour is always located on the front plane. Under End Condition, click Maintain thread length. This option keeps the thread at a constant length from the start surface. Click .