How do you check the oil on a Honda Elite 80?
Check for a big plastic knob around the bottom of the engine crankcase. Usually no tools are required. On the right hand side right below the muffler is the “dipstick” to check the oil. The oil drain plug is on the left side of the scooter, near the kickstand, it is an allen type screw.
How much oil does a Honda Elite take?
Unscrew the oil filler cap, located on the right side of the motor, and insert a funnel into the filler neck. Add fresh engine oil slowly by pouring it into the funnel. Stop filling once you have added 3/4 qt. of oil to the engine.
What kind of oil does a scooter take?
15w40: This is the engine oil used in most motorcycles and scooters. This oil is your best bet for use in summer and peak performance. 10w30: This engine oil is perfect for winter. During winter, you’ll need some engine oil on the thinner side, and 10w30 would give you the best performance.
How fast does the Honda Elite 80 go?
When you twist open the throttle the Elite 80 pulls solidly and predictably to its top speed of 45mph. You get the power of a 50cc 2-stroke engine in a quieter, more reliable and more fuel efficient 4-stroke package.
What’s the best oil for scooter?
Comparison Table
| Image | Product | Price |
|---|---|---|
| EDITOR’S CHOICE | Castrol 06116 POWER1 V-TWIN 4T 20W-50 | Check Price |
| MOST REVIEWED | YamaLube All Purpose 4 Four Stroke Oil | Check Price |
| BUDGET PICK | Royal Purple ROY01315 | Check Price |
| TOP PICK | Motul 104034 710 | Check Price |
Do you need to change oil on Honda Elite 80?
Minor complaints aside, the Elite 80 is a very well engineered scooter. It’s got a cool indicator on the dash that lets you know when it’s time to change the oil. This indicator is based purely on milage though and is not an indicator of actual oil quality.
When did the Honda Elite 80 come out?
During the 1985 model year, the Elite 80 was sold alongside Honda’s Aero 80, but for ’86 the Aero 80 was dropped and the Elite 80 left to stand on its own against Yamaha’s 2-stroke Beluga / Riva 80 (which lasted until ’87). The Elite 80 was quite a successful scooter and it enjoyed a remarkable run from 1985 all the way to 2007.
Do you need universal fuel filter on Honda Elite 80?
Anyone with an Elite 80 should spend $5 on a universal fuel filter and then snip your filter line and slip this in. This is especially important if you’re getting an Elite 80 running after several years of sitting and it might have some grub in the tank. Secondly, the Elite 80 loves to snap exhausts where the header pipe meets the muffler.
How does the oil change indicator work on a Honda Elite?
It’s got a cool indicator on the dash that lets you know when it’s time to change the oil. This indicator is based purely on milage though and is not an indicator of actual oil quality. The indicator flips from green to red whenever the oil change interval milage has been driven.
How to change oil in Honda Elite Scooter?
How to Change the Oil in the Honda Elite Scooter. 1 Step 1. Select a smooth, level work area and park the scooter on its center stand. Start the motor and allow it to warm up for five to 10 minutes. 2 Step 2. 3 Step 3.
How often do you need to change the oil on a Honda scooter?
Regular oil changes, which Honda recommends you perform every thousand miles, can often completed in less than 10 minutes with minimal tools. Note that the CH50 Elite scooter does not require oil changes, as its two-stroke motor relies on a gas/oil mixture for lubrication.
Where is the drain plug on a Honda Elite 80?
I am separating the Elite 80 from the bigger scooters because it has a unique drain plug location. The drain plug is on the lower left hand side of the engine in the red circle. It is not located under the engine like the other scooters. There is a plug under the engine, that is often taken for the drain plug.
Do you need oil change on CH50 Elite Scooter?
Note that the CH50 Elite scooter does not require oil changes, as its two-stroke motor relies on a gas/oil mixture for lubrication. Select a smooth, level work area and park the scooter on its center stand. Start the motor and allow it to warm up for five to 10 minutes.