How do you check the oil on a 1100 V Star?

How do you check the oil on a 1100 V Star?

Crouch down slightly so that you can see the “oil sight glass” window on the engine case, just above the front left foot peg. Take note of the upper and lower indicator marks on the oil sight glass window. The upper mark denotes the maximum oil capacity, while the lower mark denotes a nearly empty oil level.

How do you change oil on a Yamaha V-Star 1100?

Follow the steps below and watch our Yamaha V-Star 1100 Oil Change video above to change your V-Star’s oil like a pro. Step 1. Warm the engine by running it on idle for a minute or two. This heats up the oil and helps it drain faster. Also remove the oil fill cap, which allows the crankcase to breathe and speeds up the oil draining process.

Where is the oil filter on a V-Star 650?

While the engine oil continued to drain, I moved to the filter. The V-Star 650 has a 2-part decorative cover over the oil filter housing, and both pieces need to be removed separately to access the filter. Using my allen wrench, I pulled the 3 bolts from the outer cover and removed it.

When do you change the oil on a Yamaha 650?

Yamaha has been making the V-Star 650 motorcycle, with only cosmetic changes, from 1998 to the present. The oil and filter change procedure for all these bikes is substantially similar for all of ’em.

Where is the oil filter on a Yamaha?

The oil filter is a paper canister-type, located on the low right side of the engine, directly behind the front exhaust pipe. The front pipe must be removed to access the oil filter.

Where is the oil filter on a Yamaha V-Star 1100?

The oil filter is a paper canister-type, located on the low right side of the engine, directly behind the front exhaust pipe. The front pipe must be removed to access the oil filter. The oil recommended is a 20W40 synthetic type; however, it is difficult to find, therefore a 20W50 oil is a good substitute.

How often do you change the oil on a Yamaha V Star?

Just add 3 quarts, run the bike for a few seconds and then slowly add oil until within window lines. This oil filter relocation kit is a must for any Yamaha V Star 1100 owners who change their oil more than once per year. The design of the V Star necessitates removing the exhaust each time you change your oil, an asinine design flaw.

How to change the oil filter on a Yamaha?

I used a K&N filter (favorite brand) which fit perfectly and I had to add about an extra .2 quarts of oil above the usual amount listed for a change with filter (3.5 instead of 3.3). Just add 3 quarts, run the bike for a few seconds and then slowly add oil until within window lines. 5.0 out of 5 stars Great relocation kit!!!

Do you have to change the exhaust on a V Star?

The design of the V Star necessitates removing the exhaust each time you change your oil, an asinine design flaw. This kit was a fairly simple install, a caveat being that the aluminum nipples for the braided lines are quite soft, so care must be taken not to cross thread or over tighten.