How do you change the spark plugs on a Suzuki?

Remove carbon deposits with a wire or pin and adjust the spark plug gap. To access the spark plugs: 1) Remove the engine cover. 2) Disconnect the coupler (1) while pushing the release lever. 3) Remove the bolt. 4) Pull the ignition coil out. When replacing spark plugs, you should use the brand and type specified for your vehicle.

What should I do if my spark plug is not working?

You should inspect spark plugs periodically for carbon deposits. When carbon accumulates on a spark plug, a strong spark may not be produced. Remove carbon deposits with a wire or pin and adjust the spark plug gap. To access the spark plugs: 1) Remove the engine cover. 2) Disconnect the coupler (1) while pushing the release lever.

How big of a spark plug do you need for a motorcycle?

You’ll need a deep socket. A decent tool kit will have them. Don’t get confused between thread size and socket size. Motorcycle spark plug socket sizes are usually 16mm, 18mm or 20.6mm (21mm will do). Whereas the threads are usually 10mm, 12mm or 14mm.

How do you remove carbon from spark plugs?

When carbon accumulates on a spark plug, a strong spark may not be produced. Remove carbon deposits with a wire or pin and adjust the spark plug gap. To access the spark plugs: 1) Remove the engine cover. 2) Disconnect the coupler (1) while pushing the release lever. 3) Remove the bolt. 4) Pull the ignition coil out.

How big are the intake valves on a Suzuki H25A?

Intake valves are 30.0 mm (1.1811 in) in diameter, and the exhaust valves are 28.0 mm (1.1024 in). The H25A has self-adjusting hydraulic lifters. ATTENTION!

How do you replace spark plugs on a 1999 Suzuki Vitara?

gripping its cap. 2) Pull out high-tension cord from spark plug while gripping its cap. 3) Remove ignition coil bolt, and then pull out ignition coil assembly. Check for damage, deterioration and terminal corrosion. If check result is not satisfactory, replace ignition coil assembly. 1) Install ignition coil assembly.

Intake valves are 30.0 mm (1.1811 in) in diameter, and the exhaust valves are 28.0 mm (1.1024 in). The H25A has self-adjusting hydraulic lifters. ATTENTION!

What kind of spark plug does a Suzuki Grand Vitara use?

This part is also sometimes called Suzuki Grand Vitara Spark Plug. We stock spark plugs parts for most Suzuki models including Forenza, Samurai, SX4, XL7, Sidekick, Aerio, Reno, Verona, Kizashi, Esteem, Vitara, Swift+, Swift, Equator, SX4 Crossover, X90, SJ410, Forsa, SJ413, LJ81 and SA310.

What should I do before replacing my spark plugs?

Be sure to let your car’s engine cool thoroughly before replacing your spark plugs. This will make removal of the plugs and the spark plug wire or ignition coil boot easier. Thoroughly clean the area around your spark plugs.

What happens when you take spark plug out of car?

Once you remove the spark plug, you’ll have an open hole directly into the inside of your engine, and any dirt or debris around the spark plug can fall straight in and cause serious wear or damage to your engine—something that should be avoided, for obvious reasons.

Do you need to set the gap when installing new spark plugs?

DO I NEED TO SET THE “GAP” WHEN INSTALLING A NEW SET OF PLUGS? Maybe. A spark plug part number might fit hundreds of different engines from many different manufacturers. Although the NGK factory will set the gap to a preselected setting, this may not be the right gap for your particular engine.

What kind of spark plug does a Suzuki NGK use?

Suzuki Model Type Year Gap Standard 225 DF225 V6 2004-2004 0.8mm (.032″) BKR6E 225 DT225 EFI 1.0mm (.040″) B8HS-10 225 DT225 V6 1987-2003 1.0mm (.040″) BR8HS-10 250 DF250 V6 2004- 0.8mm (.032″) BKR6E

What happens if the spark plug gap is wrong?

Although the NGK factory will set the gap to a preselected setting, this may not be the right gap for your particular engine. The incorrect plug gap for your engine can contribute to a high rate of misfires, loss of power, plug fouling, poor fuel economy and accelerated plug wear.

What are the symptoms of a narrow spark plug?

The symptoms of narrow gap include a noticeable (continuous) cylinder miss, hard starting if all the plugs have narrow gaps, rough idle and engine hesitation. A spark plug that does not fire, resulting from a narrow gap, will appear black or wet when inspected. The black or wet appearance indicates unburned fuel.

What’s the best way to tighten a spark plug?

Torque the spark plug up to your manufacturer’s recommended settings. If you don’t have a torque wrench, then get the plug hand tight and then add a ½ turn for a plug with a gasket, and more like a ¼ turn for a tapered spark plug. Over-tightening can snap the spark plug – a nightmare. Don’t put any lubricant or thread lock on the spark plug.

What do you use to cut spark plugs?

Using a dremel with a cutoff wheel or a hacksaw you will need to cut the ground electrode even with the edge of the center electrode. You need to be careful not to hit the center electrode or the porcelain. Next you will need to use a file to remove any burrs left from cutting the ground electrode.

What’s the best way to remove a spark plug?

Don’t yank on the wire to pull out of the plug, or you’ve got a bigger job on your hands and a ruined spark plug lead . Fit your socket wrench with the extension bar and use the ratchet to remove the spark plug from its housing slowly and with caution.

Where are the spark plugs located on a V6 car?

On an inline 6-cylinder, they are located on the top or side of the engine head. On V6 and V8-cylinder engines, plugs should be separated evenly on each side of the engine. Some cars have engine covers you’ll have to remove to see the spark plug wires, tracing them back to find the plugs themselves.

When do you change the spark plugs in a car?

If you’ve been running the car for a while, the plugs and the entire engine and exhaust system manifold can get extremely hot. Only remove them when the engine is cool enough to touch. In the mean time, assemble your tools while you wait for your engine to cool. To change your spark plugs, you’ll need:

Navigation