How do you change the light bulb on a 911 Carrera?
With the assembly pushed back into the fender, use the headlamp tool from your 911 Carrera tool kit to lock it into place. If you don’t have this tool, you can also use a 5mm socket. With the tool facing upward, rotate it toward the rear of the car to lock it into place, or rotate it toward the front of the car to unlock.
How do you change the lenses on a Porsche Carrera?
Replacing old, faded lenses not only improves your Carrera’s overall appearance, it also increases its safety as well. Faded lenses tend to be harder to see and block much more light than brand new ones. On the front of the 911, the side marker lenses are removed by simply pulling on them. A snap-tab holds them in place.
How do you replace the headlight assembly on a 1999 Chevy Carrera?
The photos show the replacement process on the 1999-2001 Carrera–the 2002-2005 is very similar. The headlamp assemblies are held in the car by an ingenious latching system incorporating a cam lever and release tool. In order to remove the headlight assembly, you’ll need to first find the headlamp tool in the tool kit.
Can you replace the third brake light in a Porsche?
The third brake light is easily accessible from the exterior of the car. If you are replacing bulbs, make sure that you replace your old bulbs with the same exact style and wattage as the originals. Swapping in higher wattage bulbs could damage your wiring and possibly melt your lens and bulb holder.
How to change tail light on Porsche 911 Carrera 4?
Complete steps to change a tailight bulb on a 2000 Porsche 911 Carrera 4 3.4L 6 Cyl. Convertible About Us Maintenance Parts & Tools Contact English SpanishFrench Search Home Porsche 911 2000 Lights / Tail Light (replace bulb) Tail Light Change 1998-2005 Porsche 911 1. Getting Started – Prepare for the repair Learn More > 2.
The photos show the replacement process on the 1999-2001 Carrera–the 2002-2005 is very similar. The headlamp assemblies are held in the car by an ingenious latching system incorporating a cam lever and release tool. In order to remove the headlight assembly, you’ll need to first find the headlamp tool in the tool kit.
Is the brake light the tail light on a 911?
Some of the other bulbs in the tail light cluster such as the brake light or turn signal may also function as the tail light in your 911. It is possible for the turn signal or brake light to work but the tailight part to be burnt out – replacing the bulb on your 911 will restore functionality to both.
Where is the release plug on a Porsche Carrera?
Pull back the side carpeting on the inside of the trunk and locate the black rubber plug as shown here (green arrow). Pull the plug out of the body. Insert lower left. With the plug removed, you can see the headlight release cam assembly inside. Use the tool supplied in the vehicle tool kit to turn the release cam (blue arrow).
Where is the third brake light on a Porsche Carrera?
Shown here is the third brake light directly above the rear engine lid. Pry out the small insert piece on the third brake light lens (red arrow) with a small screwdriver.
Pull back the side carpeting on the inside of the trunk and locate the black rubber plug as shown here (green arrow). Pull the plug out of the body. Insert lower left. With the plug removed, you can see the headlight release cam assembly inside. Use the tool supplied in the vehicle tool kit to turn the release cam (blue arrow).
Shown here is the third brake light directly above the rear engine lid. Pry out the small insert piece on the third brake light lens (red arrow) with a small screwdriver.
Replacing old, faded lenses not only improves your Carrera’s overall appearance, it also increases its safety as well. Faded lenses tend to be harder to see and block much more light than brand new ones. On the front of the 911, the side marker lenses are removed by simply pulling on them. A snap-tab holds them in place.