How do you change the drive belt on a Toyota 4Runner?
Loosen the lock nut for the pulley and then loosen the adjuster to move the pulley and release tension on the belt so you can remove it. To access some belts, a skid plate might have to be removed, and in the case of the 3rd Gen Toyota 4runner we were working on, the front skid plate needs to be removed to access the AC Belt.
Do you need to remove the skid plate on a Toyota 4Runner?
To access some belts, a skid plate might have to be removed, and in the case of the 3rd Gen Toyota 4runner we were working on, the front skid plate needs to be removed to access the AC Belt. **Accurate belt tensions are important. If the belt is too loose, it can slip on the pulleys and not drive the vehicle component as effectively.
How do you remove a hard drive belt?
To remove a belt, you loosen a pivot bolt, loosen the lock nut for the adjuster, and then loosen the adjuster bolt to remove tension on the belt. Installation of the belt is the reverse. Some belts are tensioned with idler pulleys and the concept is the same.
How do you remove a belt from a classic car?
Belts are usually tensioned with some type of adjuster unless it’s a older classic car that doesn’t have adjusters. To remove a belt, you loosen a pivot bolt, loosen the lock nut for the adjuster, and then loosen the adjuster bolt to remove tension on the belt. Installation of the belt is the reverse.
How do you change the belts on a Toyota 4Runner?
Remove the belts one at a time by snaking them through the fan blades. As you take them off, mark which is which and match to the new belts exactly. Snake the new belts through the fan and on to the appropriate pulleys like the old belts, starting with the alternator belt.
Is there a way to remove the alternator belt?
Much easier to do it this way. First belt you want to remove is the alternator belt. To do so, you need to loosen 2 bolts, as pictured below. This will allow the alternator to swivel down enough to let you slip the belt off. After you have it free, easiest way is to just cut it in half and remove it.
What kind of alternator does a Toyota 4Runner have?
The Toyota 4Runner model vehicles come equipped with two different types of alternator belts. The first belt is a V-belt that controls each engine accessory separately.
How do you adjust the radiator on a Toyota 4Runner?
Toyota uses ribbed belts on your 4Runner that have to be adjusted manually. It is much easier to get to the belts if the skid plate (or plates) is out of the way. Remove the bolts with a 12mm socket. Figure 1. Skid plates. You can take the upper radiator hose off if you think it will get in your way. If you do, remember to refill the coolant.