How do you change a rear brake line?
Park the car on a level street and place blocks behind the wheels if possible. Loosen the lug nuts on the tire and then jack the car up off of the ground, securely prop with jack stands. Once the car is suspended safely, you can remove the lug nuts completely and remove the tire itself. You can now easily access the brake lines.
Where are the brake lines on a car?
Look how the car is built: On some cars, the front and rear suspensions are on subframes. In most cases, the brake lines installed on the unibody and the subframes are attached. This can create problems if the brake or fuel lines need to be replaced.
Can a ridged brake line be replaced?
This can create problems if the brake or fuel lines need to be replaced. In the days of ridged lines, you might have had to remove the subframe, but more flexible tubing is now available that can be formed in place and routed to the attachment points. 3.
How do you disconnect the brake line on a car?
Disconnect the hose from the brake system. The flexible hose will most likely be a rubber hose (sometimes it may be braided steel) leading from the central brake line to the caliper piston in disc brakes or the wheel cylinder in drum brakes. To disconnect the hose, you should remove the retainer clip between the hose and the steel line.
How do you change a flexible brake line?
Replacing Flexible Brake Hoses Disconnect the hose from the brake system. Remove any brackets or bolts along the flexible line. Remove the hose from the brake caliper or wheel cylinder. Attach the new hose to the brake caliper or wheel cylinder. Attach the new hose to the brake system. Bleed the brakes.
Disconnect the hose from the brake system. The flexible hose will most likely be a rubber hose (sometimes it may be braided steel) leading from the central brake line to the caliper piston in disc brakes or the wheel cylinder in drum brakes. To disconnect the hose, you should remove the retainer clip between the hose and the steel line.
Where are the front and rear brakes located?
In North America and many parts of Europe this is the opposite. You ride on the right side of the road and your front brake is on the left-hand side, the rear brake is on the right-hand side.
Where do you attach brake hose to wheel?
Remove any brackets or bolts along the flexible line. The brake hose may be mounted to the strut or another sturdy point between the central line and the wheel. You will need to locate any such connections by tracing the line from end to end. Loosen and remove any mounting connections you find.