How do you change a fuel filter on a 1997 Toyota Camry?
- Step 1 – Relieve fuel system pressure.
- Step 2 – Loosen fuel filter’s top bolt.
- Step 3 – Remove filter and bracket assembly.
- Step 4 – Fit new filter to bracket.
- Step 5 – Re-install filter and bracket assembly.
- Step 6 – Reattach top and bottom fittings to new fuel filter.
- Step 7 – Finish Installation.
Where is the fuel filter located on a 1998 Camry?
Locate the fuel filter. On the 1998 Camry, it is on the driver’s side, under the hood, just below and behind the air filter housing. It can be identified by the fuel line running from the top back toward the engine.
Where is the fuel filter?
The fuel filter will be located either inside the fuel tank or fitted into the fuel line between the tank and the fuel pump. Some engines have internal, non-serviceable fuel filters.
How do you replace the fuel filter on a Toyota Camry?
Using a backup wrench to hold the filter, loosen the bolt at the top of the fuel filter with another wrench. Then disconnect the fitting from the filter. Figure 3. Location of the top fuel line fitting on fuel filter. Loosen the bolts that hold the fuel filter bracket to the bulkhead.
Where is the fuel line fitting on a Toyota Camry?
Figure 3. Location of the top fuel line fitting on fuel filter. Loosen the bolts that hold the fuel filter bracket to the bulkhead. This will allow you to remove the filter and bracket as an assembly. After you have removed the assembly, remove the old filter from the bracket.
Can a throttle filter be removed from a Camry?
Accessing the throttle body intake is easier with the air filter box and air hose removed. Before torquing off the lower fuel line fitting, have a rag on hand to capture any fuel that may leak after removal.
Is there a leak in the fuel filter?
Yes, access to the bottom is tight, but the magazine last year talked about some unusual construction of the fuel supply line that made it prone to small leaks after filter replacement.