How do you break in a new clutch WRX?
Rev to 3,000 rpm and let the clutch out (don’t pop it and don’t slip it, find the middle ground). Accelerate at a good clip in first to 6k. Depress clutch FULLY. Coast to zero or near zero with clutch still fully depressed.
How long does a clutch last in a WRX?
They’re designed to last at least 50,000 miles, but it can vary based on how well you take care of your car and what your driving style is. If you do a lot of city driving, you may find that your clutch wears out faster due to the frequent shifting between lower gears.
How do you replace the clutch on a Subaru Impreza?
Look down beside where the starter motor sits an on the gearbox you’ll see a hex-headed hole for the clutch fork. Stick a 10mm allen key or 10mm hex-socket in that and undo it (could be very, very stiff), then find a small bolt/screw to wind into the threaded hole behind the plug.
How to remove a gearbox from a Subaru Impreza?
Then, with the gearbox supported by a trolley jack, start undoing the gearbox crossmember bolts. After it has come down a short way you’ll have to undo the shifter mechanism, and then its right to slowly lower it down. This is where the extra hands are useful (to stop it falling off the jack).
How long to Dissasembly a Subaru Impreza GC8?
Dissasembly is covered from Steps 1 to 27. Reassembly is covered from Steps 28 to 52. This task could take from 12 to 20 hours, depending on how particular you are with cleaning all your parts. A helper is needed to work the floor jack to lower and raise the transmission while you steady it under the car.
Do you need a helper for a clutch replacement?
A helper is needed to work the floor jack to lower and raise the transmission while you steady it under the car. It is helpfull to use the Electrical & Torque Checklists below during reassembly. Check each item off the list as it is completed. LETS GET STARTED.