How do I turn off the indicator lights in my car?

How do I turn off the indicator lights in my car?

How to Reset the Warning Lights on the Dash

1. Open the hood of your vehicle.
2. Loosen the nut that holds the negative terminal to the battery with the pliers.
3. Completely remove the cable from the negative battery terminal.
4. Leave the battery disconnected for 10 minutes to ensure that the computer is fully reset.

Can you reset the oil change indicator light?

As soon as that oil change indicator light turns on, you need to decide if you are going to replace the oil yourself and reset the light, or if you will have a professional do the job. If you can change the oil yourself, you can certainly reset the oil light. You only need to have your ignition key to perform this simple task.

When do Service StabiliTrak warning lights come on?

For most truck owners, the warning lights occur frequently when the truck is idling and then disappears and reappears while driving. The “Service Stabilitrak” light will usually appear first and then the car will turn traction control off. Once traction control is turned off, the transmission beings to shift very hard and rough.

How do you reset the oil light on a Ford truck?

Turn the ignition to the “on” position, but do not start the engine. For 2004-2010 Ford trucks: Press and hold the Select/Release knob on your dashboard until the display reads “OIL LIFE XXX% HOLD RESET = NEW”. Use the directional pad on the steering wheel to access the settings menu.

What to do when turn indicators don’t flash?

Turn Indicators on Dash Don’t Flash 1 First, check that your turn lights work properly. 2 If one of the signal lights doesn’t come on, check the bulb; check the bulb socket for corrosion or damage; check for a bad ground at the socket. 3 Check for an open in the circuit, between the light (s) that doesn’t work and the turn signal switch.