How do I reset the perform service indicator?
To reset the “Perform Service” indicator system (after performing the scheduled maintenance) refer to the following procedure: 1. Turn the ignition switch to the ON position (Do not start engine ).
How to reset perform service indicator on Dodge 6.7L?
This bulletin is to aid you on resetting the Perform Service indicator you will find on a Dodge 6.7L with the EVIC displaying this message. PERFORM SERVICE INDICATOR- RESET the “Perform Service” message will display on the EVIC each time you turn the ignition switch to the ON/RUN position to indicate emission maintenance is required.
How do I reset the perform service message?
Unless reset the “Perform Service” message will display on the EVIC each time you turn the ignition switch to the ON/RUN position to indicate a emission maintenance is required. To reset the “Perform Service” indicator system (after performing the scheduled maintenance) refer to the following procedure: 1.
How to reset Toyota Highlander service maintenance indicator?
2008-2013 Highlander Maintenance Required Soon Reset STEP 1. Turn the Ignition ON. Don’t start the Engine. STEP 2. Press the ODO/TRIP BUTTON to display to TRIP A. STEP 3. Press and hold ODO/TRIP BUTTON and turn ignition to the “RUN” position. Hold knob for at least 5 seconds until “RESETTING MAINTENANCE DATA COMPLETED” is displayed. STEP 4
How to reset the perform service indicator system?
To reset the “Perform Service” indicator system (after performing the scheduled maintenance) refer to the following procedure: 1. Turn the ignition switch to the ON position (Do not start engine). 2. Press and release the brake pedal two times. 3. Fully depress the accelerator pedal slowly two times within 10 seconds.
This bulletin is to aid you on resetting the Perform Service indicator you will find on a Dodge 6.7L with the EVIC displaying this message. PERFORM SERVICE INDICATOR- RESET the “Perform Service” message will display on the EVIC each time you turn the ignition switch to the ON/RUN position to indicate emission maintenance is required.
How to reset the BMW service light you service indicator?
Dashboard warning lights will turn on when a vehicle issue is detected, regardless of the number of miles or time since the last service. The basic steps are similar to resetting the BMW service light, with a small difference: Follow steps 1 through 3 from the instructions above. Release the odometer button after the service message comes on.
Where can I find the service indicator light?
Contact Tulley BMW of Nashua if you have any questions in Manchester or Lowell, MA. The service indicator light will display the number of miles or amount of time until the next required service interval.