How do I Reset my Mercedes Benz COMAND?

Select System by turning the COMAND controller and press to confirm. Select Reset and press to confirm. A prompt appears asking whether you wish to reset. Select Yes or No and press to confirm. If you select No, the process will be aborted. If you select Yes, another prompt appears asking whether you really wish to reset.

What to do if your Mercedes AC does not reset?

The AC system is reset now and the hot air blowing problem is likely to be solved. If your Mercedes car does not respond to this procedure, you should check the owner’s manual. For example, if you want to know about Mercedes E320 AC reset, it is better to check the manual and follow the manufacturer’s recommendations.

How to reset a Mercedes air conditioning system from Japan?

To be on the safe side, hold them until their LED lights start flashing. Step 3: Wait for about a minute for the LED lights to stop flashing. When they do, turn the car off. Wait one more minute before restarting the engine. The AC system is reset now and the hot air blowing problem is likely to be solved.

What do you call a Mercedes climate control reset?

Sometimes, the process is called a Mercedes climate control reset. The reset procedure is similar no matter whatever you call it. However, if the AC shows any trouble after resetting, you have to take it to a servicing shop or the dealership for a permanent fix.

How do you reset the AC system on a Mercedes?

Hold these buttons down for about five to 10 seconds, or until the LED lights on both buttons start flashing. Wait 45 to 60 seconds for the LED lights to stop flashing. Then turn off the car. Wait 60 seconds and then start the car engine again.

Why does my Mercedes E320 AC not reset?

For example, if you want to know about Mercedes E320 AC reset, it is better to check the manual and follow the manufacturer’s recommendations. If a Mercedes air condition reset does not work, these following reasons could be causing the trouble: When the AC is releasing hot air, the possible reason could be a defect in the damper.

Can you reset the transmission on a Mercedes Benz?

This will make your car fun to drive again, it’s like getting a free tune-up. This procedure applies to all Mercedes-Benz that come with the 5-speed 722.6 and 7 -speed 722.9. This is about 95% of Mercedes-Benz cars on the road today with the exception of models made before 1995. This reset procedure works on automatic transmission only.

How does anti theft system work on Mercedes Benz?

It has nothing to do with the anti theft system in the car. When a COMAND unit is installed into a vehicle (whether during production or as a replacement) it is equipped with a PIN. This PIN will be associated to the VIN and relies on the communication network within the vehicle for validation.

What to do if your Mercedes Benz is stolen?

We recommend visiting an authorized Mercedes-Benz dealership to have this situation permanently resolved. (1)I locked the car with the remote and open the door from inside. No alarm triggered. (2)I locked again from the outside but leave the windows opened. Then I opened the door by reaching the inside door handle from outside.

Is there anti theft protection on 2015 Mercedes Benz B250?

Ironic since there is no Anti-Theft Protection available for the 2015 B250. When I bought my car (Star Motors Ottawa) I asked the clueless MB sales guy about an alarm system. He said yeah, yeah no problem there’s a fee of $215 for this, which I paid.

How do I reset the system on my Mercedes Benz?

Resetting is recommended before selling or transferring ownership of your vehicle, for example. Select Vehicle in the main function bar by turning the COMAND controller and press to confirm. Select System by turning the COMAND controller and press to confirm. Select Reset and press to confirm. A prompt appears asking whether you wish to reset.

When to reset service indicator light on GL450?

Service technicians reset the light during regular maintenance so it turns off until service is next required. You can manually reset the service indicator light when you maintain your vehicle. These instructions apply to the 2011 GL450. The sequence is the same or similar for previous model years.

When to reset the service indicator light on a Mercedes?

The Mercedes Benz GL450 sport-utility vehicle is equipped with a service indicator warning that is displayed at regular mileage intervals when maintenance is needed. Service technicians reset the light during regular maintenance so it turns off until service is next required.

When does the COMAND system shut down Mercedes Benz?

I persisted with MB technical support; here is how they replied: The E350 has an on-board system which continuously monitors voltage. The Comand system is apparently one of the largest electrical loads on the vehicle. When the level goes beyond a certain threshold, Comand is intructed to shut down.

What to do if your Mercedes Benz Radio is not working?

For you to do that, you will need to remove the fuses for the CD Changer, COMAND/ NAV / DVD Player / Radio, Audio Gateway AGW, and the Voice Unit if it is equipped with one, for at least 10 minutes. Doing a soft reset for these systems will force the head unit to rest. This normally restores the systems to working order.

How do I reset the COMAND system settings?

Is the command system on my Mercedes S350 working?

Our 2006 S350 is experiencing similar problems with the Command system showing the Mercedes logo. We took it to our Mercedes dealership … read more associates in automotive te… Factory Mercedes-Benz Te…

When does Mercedes Benz COMAND system stop functioning?

When one of your components goes down, your COMAND will stop functioning. You need to figure out which component is defective by bypassing each component until you find the problem. The Audio Gateway is the brains of the Mercedes-Benz COMAND system.

Is there a way to turn off the COMAND system?

Upon leaving though you will have to turn the Radio off thru the Comand “on” button since by opening the door this will not shut off the radio. According to what MM9351 wrote underneath his member name, the car is equiped with P2. That means he has the keyless start/stop feature. Unless of ofcourse he took the button out and is using the key.

When did COMAND come out for Mercedes C class?

It won’t grant you extra lives and bonus points, but it will help you a lot with customizing the electronics in your W204 Mercedes. This article applies to the Mercedes-Benz C-Class (2007-2014). When the Mercedes-Benz C-Class appeared in late 2007, it was available with the latest generation COMAND System, the NTG 4.

What are the problems with a Mercedes Benz COMAND?

Some common problems with the Mercedes-Benz COMAND system include issues such as: Radio panel doesn’t turn on. (Hint: Check fuses.) The fist thing you should try is to do a soft reset of the COMAND unit. To do a reset you will need to remove the fuses for at least 10 min for these systems:

Is it possible to reset COMAND to factory settings?

You can reset COMAND to the factory settings. Amongst other things, this will delete all personal data (e.g. station presets, address book entries, entries in the destination memory and in the list of previous destinations in the navigation system). Resetting is recommended before selling or transferring ownership of your vehicle, for example.

What to do if your Mercedes AC unit is not working?

However, there might not be any damage in the AC unit when it is blowing warm air or not running properly. It could be a temporary fault and a reset is likely to be enough to restore the normal function. Sometimes, the process is called a Mercedes climate control reset. The reset procedure is similar no matter whatever you call it.

How to access COMAND secret menu in Mercedes Benz C-class?

Contact your MB dealer or check MB Owners’ Forums if you have any questions. Turn the ignition key to the on (not start) position. Hold the red “hang up telephone” button, the hash (#) key and the one (1) key simultaneously on the COMAND console for 3-5 seconds.

How do you reset adaptive shifting on a Mercedes Benz?

This procedure will reset the adaptive shifting points in your Mercedes-Benz automatic Transmission Control Unit (TCU). These simple do it yourself instructions take less than 5 minutes. No tools are required to perform this procedure and make your Mercedes-Benz shift like new.

Are there any problems with Mercedes Benz COMAND system?

We have listed down common issues with the Mercedes-Benz COMAND system, including problems with The most common solution to fix any of these issues is to try to perform a soft reset of the COMAND unit.

How to reset service interval on Mercedes E class?

To reset you need to press and hold button ‘R’ (on the instrument cluster) until you here a beep and ‘SERVICE INTERVAL HAS BEEN RESET’ will now appear on the display. 7. The new service interval will now be displayed as10,000 miles

How does the reset work on an e320 Fixya?

The reset works as follows: With the key in the ignition and in posistion 2 push both the defrost button and the recirc button (at the same time) for five seconds or untill the led lights in those buttons begin to flash. Wait for 30 seconds or untill the led’s stop flashing. Switch off the ignition.

Navigation