Menu

Navigation

How do I reset my Lexmark e360dn PC kit?

Posted on by Arif Clayton

How do I reset my Lexmark e360dn PC kit?

After installing the new photoconductor unit, make sure the printer is powered on and then open the front cover. With the front cover open, press and hold the stop/cancel (X) button. Once all the printer lights begin flashing or your LCD screen says “Resetting PC Counter,” let go of the button.

How do I reset my Lexmark Imaging Unit?

Reset PC Counter

  1. With the power on, open the front door.
  2. Press and hold the cancel button (X). After a few seconds, the printer will flash its indicator lights telling you it’s resetting the life counter.
  3. Close the front door.
  4. The printer should restart automatically.
  5. Enjoy your new imaging unit!

What does a photoconductor in a printer do?

The photoconductor kit contains a colored drum that snaps into the toner cartridge. When it presses against the more strongly charged paper, the toner particles jump off of the drum and adhere to the paper, where they get melted into place by the fuser as the page makes its way out of the printer.

How do I reset my Lexmark E360dn?

Cold reset for Lexmark E360dn, E460dn printer

  1. Turn off the printer.
  2. Press OK button and right side arrow simultaneously and turn on the printer.
  3. In configeration menu, press the right arrow button and reach to the factory default option.
  4. select restore Std Network and it will Reset the network setting.

How do you change the units of a photoconductor?

Place no objects on the front or inner cover.

  1. Turn off the power, and then unplug the power cable.
  2. Carefully open the left cover.
  3. Turn the two green levers counterclockwise ( ), and then slowly open the inner cover ( ).
  4. Remove the photo conductor unit you want to replace.

How do you reset a photoconductor Lexmark e260dn?

Solution:

  1. After installing the new photoconductor unit, open the front cover. Leave the printer powered on.
  2. With the front cover open, press and hold the stop/cancel ( ) button.
  3. Eventually all of the lights will begin flashing, indicating that the photoconductor page count has reset.
  4. Close the front cover.

How do you reset the maintenance kit on a Lexmark ms811dn?

How To Reset The Maintenance Roller Kit On Lexmark MS810 MX810 MS811 MS811 MX710 MX812 MS812 More

  1. Turn off the printer.
  2. Enter the Configuration Menu.
  3. Select Reset Roller Kit Counter from the Configuration Menu.
  4. From the options displayed, select the roller kit to reset.
  5. Select Yes to reset the roller kit counter value.