How do I reset my Harley after tipping?
To reset the system, upright the bike, set the “kill” button in the “run” position and cycle the ignition off, on then off. It’s also in the manual.
How do I start my Harley without the code?
STARTING YOUR HARLEY-DAVIDSON WITHOUT YOUR FOB! Immediately hold both turn signal indicators until FIVE dashes appear in the odometer gauge. Select the first digit of your PIN (a) by pressing the left turn signal button (a) times. Press the right turn signal switch one time to move to the next digit.
How do I reset my Tssm?
Press and hold left switch down for five seconds, and light will flash twice to indicate the TSSM is reset. Turn ignition to off.
What to do if your Harley won’t start?
The Harley service manual suggests to check the electrical connections at the ECM and CKP, as well as check the resistance of the ignition coil before replacing the CKP sensor. That being said, a large number of Dyna owners who have had trouble starting their bikes reported that replacing the CKP sensor immediately cured the problem.
Why is my Harley Davidson Dyna Glide not starting?
If your battery voltage and connections are in good condition, but your engine is still refusing to turn over, the problem may be in the starter circuit. Perhaps the easiest place to begin is at the starter solenoid on the right side of the motorcycle.
What to do if your Dyna bike won’t start?
Apparently, starter issues are quite common on various Dyna models, so if yours is in need of replacement, see How to Replace Starter. If you are in a bind and your starter motor is acting up, a quick tap of the solenoid with a hammer or similar small object can sometimes free the starter to start the bike.
What can cause a car not to start?
1. Ignition switch turned off. 2. A faulty ignition switch. 3. Engine run switch in off position. 4. A defective engine run switch. 5. Loose or corroded starter and battery cables. 6. A discharged or defective battery. 7. A defective starter. 8. A defective starter solenoid. 9. A defective starter shaft pinion gear. 10.