How do I reconnect my Yale lock?
In the Yale Access app, go to the side menu (upper left), tap Set Up New Device. Choose Set Up A Connect. Choose a lock with which to associate your Yale Connect Wi-Fi Bridge. When prompted, plug connect into an outlet near your door and then follow the in-app instructions.
How do you fix a push button lock?
How to Fix a Push-Button Doorknob
- Open the door and remove all trim screws from the knob and door edge with a Phillips screwdriver.
- Pull the knobs away from the door.
- Clean all the pieces of the knob with a rag, then spray them with a silicone-based lubricant.
- Reinstall the knob and test it with the key.
How do I reset my Yale lock to factory settings?
Remove the mounting plate to reveal the reset button, which is located on the left side of the cable connector. Hold down the reset button while you put in the batteries. Keep holding down on the reset button until the light turns red and the lock says “Just a moment, erasing all settings.” Release the reset button.
How do I get my Yale lock back online?
Your lock doesn’t connect directly to Wi-Fi. Instead, it uses a Google Nest Connect or Google Nest Guard for its internet connection. So you’ll only need to update the Wi-Fi information on your Connect or Guard in order to get your lock back online.
What are the clips that hold the lock rod in place?
Also known as the door lock rod fastener, these linkage clips hold the lock rod in place so your door can be securely locked. These parts are vehicle-specific and AutoZone makes finding the right parts easy: simply enter your vehicle’s year, make, model, and engine above, and we’ll only show you parts that fit. These replacement parts:
How to get discount on door lock clips?
10% OFF $75. Use Code: DIYSAVE10 Online Ship-to-Home Orders Only When people talk about automotive accessories, door locks don’t come up much, but you might think about them if your doors won’t lock. Browse our selection of door lock rod clips and kits and enter your vehicle’s info above to find the right fit.
Do you need to remove the cluster from a door lock?
Lift the whole panel straight up to clear it of the catch behind the door handle. Note: If your vehicle has electronic door locks, you will need to remove the door lock cluster panel from the door panel. Before removing the door panel, remove the screws attaching the cluster to the panel.
Why does my door lock need to be replaced?
In most cases, the problem with a door lock actuator is limited to only one door. In some vehicles, the cable that connects the door lock actuator to the inner door handle may be built into the actuator assembly. If this cable breaks and it’s not sold separately, the whole door lock actuator may need to be replaced.