How do I program my Jeep Grand Cherokee remote?
Chrysler Key Fob Programming Press the “LOCK” button on your key fob five consecutive times, while allowing 2-second intervals between each press. Next, put your key in the ignition and turn two clicks to the “RUN” position. Hold down the “UNLOCK” button and “PANIC” button simultaneously. Release both at the same time.
How to program keyless entry on a 1997 Jeep Grand Cherokee?
Double-check your Grand Cherokee’s owner’s manual for the proper procedure to program the remotes. The specific process is described in section 22 of the 1997 Jeep Grand Cherokee Owner’s Manual. Make sure to leave the driver door open during the procedure.
Can you change the remote on a Jeep Grand Cherokee?
You will find that your Grand Cherokee Jeep remote is now programmed. This process is a fast and effective way of reprogramming a remote keyless entry, and means that all is not lost when either the battery runs down and ahs to be replaced, or when you lose your remote and have to buy another one that is not intended for your own Jeep.
How do you program a Jeep Grand Cherokee?
Point the remote at the bulb. Press and hold the “LOCK” button on the remote until the doors unlock. The remote is now programmed. Check the remote for proper operation. Double-check your Grand Cherokee’s owner’s manual for the proper procedure to program the remotes.
How do you unlock a Jeep Grand Cherokee?
When you have done this, insert your key into the ignition and turn it on. Wait until your Jeep chimes are silent, then press and hold the ‘Unlock’ button on the remote. Hold this button down for four seconds and then press the ‘Panic’ button simultaneously. Hold both these buttons down for one second and then release them both.
When did the Jeep Grand Cherokee keyless remote come out?
If you don’t, you’ll have to have a Chrysler or Dodge dealer program the remote for you. The Jeep Grand Cherokee came out in 1993 as a more luxurious alternative to the Jeep Cherokee. Earlier models didn’t have keyless remote except as a special option.
Do you need a remote to program a Jeep Grand Cherokee?
Grand Cherokee Keyless Remote Programming Instructions Learn to program the remote in your Jeep Grand Cherokee. In order to do so, you must have one working remote. If you don’t, you’ll have to have a Chrysler or Dodge dealer program the remote for you. The Jeep Grand Cherokee came out in 1993 as a more luxurious alternative to the Jeep Cherokee.
When you have done this, insert your key into the ignition and turn it on. Wait until your Jeep chimes are silent, then press and hold the ‘Unlock’ button on the remote. Hold this button down for four seconds and then press the ‘Panic’ button simultaneously. Hold both these buttons down for one second and then release them both.
When did the Jeep Grand Cherokee come out?
The Jeep Grand Cherokee came out in 1993 as a more luxurious alternative to the Jeep Cherokee. Earlier models didn’t have keyless remote except as a special option. However, the feature became common as the 1990s rolled to an after. In the 2000s, the feature became standard, making the remote programminng process easy.