How do I know if I have a NV3550 transmission?
Identification. The NV3550 is 16.7″ long and has a cast aluminum case with generous ribbing. With its removable Jeep I6 bellhousing, it measures 23.1″. The front bolt pattern is oval shaped and has dowel pins for precision centering alignment to the bellhousing.
What kind of transmission does a Jeep Wrangler have?
There have been quit a few questions about “what transmission is in my TJ”. So….. I set down and copied and pasted and did a little color editing, from the TJ FSM’s (full service manual) Here they are……. Knows a couple things… That’s very cool and useful information, thanks! I have bookmarked your post for a future all-in-one reference.
What are the gear ratios on a Jeep Wrangler?
30RH: A three speed automatic transmission was used in 1992 to 1995 Wrangler & 1992 to 1996 Cherokee with 2.5L engine. Gear Ratios: 1st Gear: 2.74:1, 2nd Gear: 1.54:1, 3rd Gear: 1.00:1, Reverse Gear: 2.03:1
What kind of transmission does a jeep AW4 have?
The Peugeot transmission is always a 21 splined shaft and extends 1/2″ past the back of the transmission adapter housing. The AW4 automatic transmission comes with both the 21 and 23 splined shafts.
Where is the transmission located on a Jeep Cherokee?
The transmission in a Jeep is identified by an identification plate. This plate is stamped on the housing of the transmission and the location can vary, depending on the model year of your Jeep.
The 42RLE is a medium duty overdrive, 4-speed, automatic transmission that lives in Wranglers born from 2003 to 2011. These transmissions feature four forward gears including one overdrive gear. With an aluminum housing, the NV1550 was a short-lived 5-speed manual transmission for Jeep Wranglers.
30RH: A three speed automatic transmission was used in 1992 to 1995 Wrangler & 1992 to 1996 Cherokee with 2.5L engine. Gear Ratios: 1st Gear: 2.74:1, 2nd Gear: 1.54:1, 3rd Gear: 1.00:1, Reverse Gear: 2.03:1
When did the first Jeep transmission come out?
Assuming your Jeep hasn’t had a different transmission swapped into it, here are the original factory transmissions produced since 1945 (manuals) and 1963 (automatics). There you have it! A chronological history of transmissions for Jeeps (for you history buffs out there).
What does 10 spline mean on Jeep Wrangler transmission?
Click to expand… The 10 spline input refers to the input shaft of the transmission that mates to the engine. Here is my NV3550 input shaft while doing a clutch replacement. And the 23 spline output refers to the rear shaft that mates to the transfer case.